U-Bolts, Square/set, 2.5″ x 9″ (SQ250x90)

SET OF FOUR SQUARE U-BOLTS w/hardware

2.5″ axle diameter x 9″ long, axle BELOW springs.

Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

(SQ300x900 shown)

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$60.00

In Stock

Additional information

Weight 10 lbs
Dimensions 10.5 × 6 × 4 in

GO TO CART

Categories: , ,
SKU: SQ250x90

Recently Viewed:

No recently viewed products to display

Related products

    CalTracs Replacement Parts

    CalTracs Force transfer Links/pair- 26.5″ (L240-265-300)

    SET OF TWO

    1.25″ diameter x 26.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.

    Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.

    (0 reviews)
    $90.00 Add to cart
    CalTracs Replacement Parts

    CalTracs Rear Spring Mount (MT-2)

    1970-1981 Chevrolet Camaro.

    SOLD SEPARATELY

    Rear Spring Mount for CalTracs assembly

    Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.

    MOUNT FITS BOTH LEFT AND RIGHT SIDE.

    (0 reviews)
    $75.00 Add to cart
    CalTracs Replacement Parts

    CalTracs Monster Pivot Plates/set of 4 (PL-0424)

    SET OF FOUR MONSTER PLATES, FOUR HOLES

    Designed for RACING VEHICLES. Four holes for ultimate adjustability on lifted vehicles. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.

    IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.

    NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.

    (0 reviews)
    $95.00 Add to cart
    CalTracs Replacement Parts

    CalTracs BIG LINK KIT (BLK-240-265-300)

    Upgrade kit especially for Lifted or Offroad Trucks

    Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.

    SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS

    Replaces standard links and Heim joints on HD Trucks only.

    1.5″ diameter x 26.5″ force transfer Big Links.

    Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.

    Includes four (4) required coarse thread Heim joints.

    NOTE: Standard Heim joints will NOT fit coarse threaded ends.

    PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER

    (0 reviews)
    $245.00 Add to cart