SPRING SHACKLES/set (SH-300x562A)

Calvert Racing Shackle and Bushing set for A-Body Mopar products.

Set includes two shackles and a total of eight polyurethane bushings (4 for the rear eye of the spring and 4 for the upper frame shackle). The shackles retain a 1/2″ shouldered bolt that necks down to a 3/8″ thread, 3-1/2″ center to center. Required nuts included.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$89.00

In Stock

Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A

Additional information

Weight 3 lbs
Dimensions 10 × 7 × 3 in

GO TO CART

Categories: ,
SKU: SH-300x562A

Recently Viewed:

No recently viewed products to display

Related products

    Accessories

    U-Bolts, Round/set, 2.75″x7″ (UR275x70)

    SET OF FOUR ROUND U-BOLTS w/hardware

    2.75″ axle diameter x 7″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come withย  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    U-Bolts, Square/set, 3″x13.5″ (SQ300x1350)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 13.5″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    SQUARE U-BOLTS (spring OVER axle): We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart
    Accessories

    TIE DOWN BRACKETS/PAIR (TD-145)

    TIE DOWN BRACKETS – SET OF TWO, 45 degree angle

    One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….

    IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!

    Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.

    NOTE: Does not include straps. Fits STANDARD CALTRACS (all cars).

    1/4″ Zinc-Plated Steel, 45 degree angle. Overall size: 5-1/8″ x 4″; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.

     

    (0 reviews)
    $30.00 Add to cart
    Accessories

    STRUT ROD KIT/pair (SR-40)

    Built for Mopar A-Body.
    Sold as a pair.

    (SR-40 shown)

    (0 reviews)
    $250.00 Add to cart