CalTracs MAX ADJUSTABLE Pivot Plates/set of 4 (PL-0514)

NEW! SET OF FOUR MAX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye. Designed to replace your current CalTracs Pivot Plates.

Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.

  • CHEVROLET NOVA 1962-1967
  • FORD FAIRLANE 1962-1971
  • FORD FALCON 1966-1970
  • FORD GALAXIE 1960-1964
  • FORD PINTO 1971-1980
  • FORD RANCHERO 1960-1971
  • FORD TORINO 1968-1976
  • MERCURY COMET 1966-1977
  • MERCURY COUGAR 1967-1973

INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.

Made with 5/16″ Mild Steel, black powder coated for added durability. Also available: Full Pivot Assemblies (fully assembled, includes other hardware), call for info.

IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.

NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$120.00

Out of stock

Additional information

Weight 10.5 lbs
Dimensions 10 × 12 × 3 in

Out of stock

GO TO CART

Categories: ,
SKU: PL-0514

Recently Viewed:

No recently viewed products to display

Related products

    CalTracs Replacement Parts

    CalTracs Pivot Plates/set of 4 (PL-0423)

    SET OF FOUR PLATES, THREE HOLES

    Designed for RACING VEHICLES. Three holes for adjustability on lifted Trucks. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.

    IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.

    NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.

    (0 reviews)
    $80.00 Add to cart
    CalTracs Replacement Parts

    CalTracs HD Rear Spring Mount (MT-2504)

    SOLD SEPARATELY

    Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 4″ diameter axle AND 3″ wide leafspring.

    Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.

    MOUNT FITS LEFT OR RIGHT SIDE.

    (0 reviews)
    $90.00 Add to cart
    CalTracs Replacement Parts

    CalTracs Force transfer Links/pair- 29″ (L265-290-325)

    SET OF TWO

    1.25″ diameter x 29″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.

    Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.

    (0 reviews)
    $90.00 Add to cart
    CalTracs Replacement Parts

    CalTracs HD Pivot Plates, 2 hole (PL-0522)

    SET OF FOUR RACING PROFILE PLATES

    Designed for RACING TRUCKS. Two Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 5″ long, measured from center of spring eye to bottom of plate.

    IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.

    NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.

    (0 reviews)
    $70.00 Add to cart