2 Degree/2″ PINION SHIMS/PAIR (2-D2)

2 DEGREE SHIMS – SET OF TWO

2″ wide. Fits 1.75′ – 2″ wide springs.

Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum.

NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.

Also available: 4 degree pinion shims

 

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$30.00

In Stock

Additional information

Weight 1 lbs
Dimensions 11 × 4.5 × 1 in

GO TO CART

Categories: ,
SKU: 2-D2

Recently Viewed:

No recently viewed products to display

Related products

  • Accessories

    U-Bolts, Round/set, 2.5″x6″ (UR250x60)

    SET OF FOUR ROUND U-BOLTS w/hardware

    2.5″ axle diameter x 6″ long

    Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR250x60 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    U-Bolts, Round/set, 3.25″x9″ (UR325x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3.25″ axle diameter x 9″ long, axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    FLIP CONVERSION KIT 1500 Series Trucks w/CalTracs INSTALLED (FLP-3134)

    FLIP CONVERSION KIT for 1500 SERIES TRUCKS (for CalTracs)
    1967-2019 Chevrolet Silverado and GMC Sierra Trucks

    Basic FLIP CONVERSION KIT for 1500 Series Trucks with CalTracs* and a 3″ axle tube and 2.5″ wide spring* already installed.
    Includes: Two Rear Mounts, Two patented Calvert Heavy Duty Perches, and set of Four U-Bolts with hardware.
    A flip kit moves the axle from beneath the leaf spring to on top of the leaf spring, which lowers the truck.

    ALSO AVAILABLE: Flip kit for 3″ axle tube and 2.5″ wide spring, part #FLP-3132
    *THIS CONVERSION KIT DOES NOT INCLUDE CALTRACS.

    (0 reviews)
    $209.00 Add to cart
    Accessories

    SPRING SLIDERS for Calvert Springs (SL-300CR )

    SET OF TWO SPRING SLIDERS

    Designed to fit Calvert Leafsprings installed on ALL CARS & TRUCKS (except Chevy Bel Air). Outside diameter aluminum bushings: 1″.

    May also fit most Chrysler factory springs due to rear bearing size.

    Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.

    (0 reviews)
    $189.00 Add to cart