Pinion Shims
Showing all 8 resultsSorted by popularity
-
AccessoriesTIE DOWN BRACKETS/PAIR (TD-145)
TIE DOWN BRACKETS – SET OF TWO, 45 degree angle
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps. Fits STANDARD CALTRACS (all cars).1/4″ Zinc-Plated Steel, 45 degree angle. Overall size: 5-1/8″ x 4″; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
(0 reviews) -
Accessories
2 Degree PINION SHIMS/PAIR (2-D)
2 DEGREE SHIMS – SET OF TWO
Pinion shims to help correct pinion angle under spring perches. For 2.5″ wide springs. Made of Billet aluminum.
NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.
Also available: 4 degree pinion shims
(0 reviews) -
Accessories
4 Degree PINION SHIMS/PAIR (4-D)
4 DEGREE SHIMS – SET OF TWO
Pinion shims to help correct pinion angle under spring perches. For 2.5″ wide springs. Made of Billet aluminum.
NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.
Also available: 2 degree pinion shims
(0 reviews) -
Sale!Accessories
2 Degree PINION SHIMS/PAIR BLEMISHED (2-DB)
2 DEGREE SHIMS – SET OF TWO
BLEMISHED. These shims contain scratches and dings which do not affect the performance of the part. ONLY AVAILABLE THROUGH CALVERT RACING. Limited number available, subject to prior sale.
Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum. Includes washers.
(0 reviews) -
Accessories
TIE DOWN BRACKETS/PAIR (TD-190M)
TIE DOWN BRACKETS – SET OF TWO (90 degree angle)
DESIGNED TO FIT STANDARD CALTRACS, CALTRACS FOR 1500 SERIES TRUCKS and CALTRACS FOR S-10 TRUCKS
Heavier than our other Tie Down Brackets: 1/4″ ” Zinc-Plated Steel, 90 degree angle. Overall size: 5-1/8″ x 4″; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps.(0 reviews) -
Accessories
4 Degree/2″ PINION SHIMS/PAIR (4-D2)
4 DEGREE SHIMS – SET OF TWO
2″ wide. Fits 1.75′ – 2″ wide springs.
Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum.
NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.
Also available: 4 degree pinion shims
(0 reviews) -
Accessories
2 Degree/2″ PINION SHIMS/PAIR (2-D2)
2 DEGREE SHIMS – SET OF TWO
2″ wide. Fits 1.75′ – 2″ wide springs.
Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum.
NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.
Also available: 4 degree pinion shims
(0 reviews) -
Accessories
TIE DOWN BRACKETS/PAIR (TD-190TM)
TIE DOWN BRACKETS FOR Series 2500-3500 TRUCKS – SET OF TWO (90 degree angle)
3/8″ Zinc-Plated Steel, 90 degree angle. Overall size: 6-1/4″ wide” x 3″ tall; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
DESIGNED TO FIT CALTRACS REAR MOUNTS:
MT-2501 (3.25″ Axle Truck)
MT-2502 (3.5″ Axle Truck)
MT-2503 (3.5″ Axle Truck with 3″ wide springs)
MT-2504 (Ram 2500/3500: 4″ Axle, 3″ spring)
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps.TD-45 Shown mounted on graphic(0 reviews)
