CalTracs-MX
Showing all 5 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1962-1967
- FORD FAIRLANE 1962-1971
- FORD FALCON 1966-1970
- FORD GALAXIE 1960-1964
- FORD PINTO 1971-1980
- FORD RANCHERO 1960-1971
- FORD TORINO 1968-1976
- MERCURY COMET 1966-1977
- MERCURY COUGAR 1967-1973
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0414)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, standard spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- AMC JAVELIN, 1968-1977
CHEVROLET CAMARO, 1967-1981
CHEVROLET NOVA, 1968-1978
DODGE ASPEN, 1976-1980
DODGE CHALLENGER, 1970-1974
DODGE CHARGER, 1966-1978
DODGE CORONET, 1965-1976
DODGE DART, 1963-1976
DODGE SWINGER, 1963-1976
DODGE DEMON, 1962-1976
DODGE POLARA, 1965-1973
FORD FALCON, 1960-1963
FORD MUSTANG, 1967-1973
MERCURY COMET, 1960-1965
MERCURY CYCLONE, 1960-1965
PLYMOUTH BARRACUDA, 1964-1973
PLYMOUTH BELVEDERE, 1965-1970
PLYMOUTH DUSTER, 1970-1976
PLYMOUTH FURY, 1962-1978
PLYMOUTH GRAND FURY, 1975-1977
PLYMOUTH GTX, 1967-1971
PLYMOUTH ROADRUNNER, 1968-1975
PLYMOUTH SATELLITE, 1965-1974
PLYMOUTH SAVOY, 1962-1964
PLYMOUTH SCAMP, 1960-1976
PLYMOUTH VALIANT, 1960-1976
PLYMOUTH VOLARE, 1976-1980
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs-MX
CalTracs MX (6900-MX)
Built for:
1968-1976 Ford Torino / Grand Torino
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (6600-MX)
Built for:
1970-1977 Ford Maverick
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (2300-MX)
Built for:
1967-1969 Chevrolet Camaro
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews)
