CalTracs-MX
Showing 19–27 of 51 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1962-1967
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs-MX
CalTracs MX (6450-MX)
Built for:
1974-1978 Ford Mustang II with original 8″ rear end. INCLUDES required Spring Pads
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
EACH KIT ALSO INCLUDES a set of U-BOLTS for stock rear ends. If your vehicle has been modified, please call us so we can sent the correct size. 661-728-9600, M-F, 8am-4:30pm Pacific Time.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (6220-MX)
Built for:
1963-1964 Plymouth Galaxie (Hanger modification required)
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
EACH KIT ALSO INCLUDES a set of U-BOLTS for stock rear ends. If your vehicle has been modified, please call us so we can sent the correct size. 661-728-9600, M-F, 8am-4:30pm Pacific Time.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, Right (MTX-37R)
SOLD SEPARATELY
Fits Chevrolet S10 with shock mounts (passenger side only)
RIGHT MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
LEFT MX Mount available, part # MT-37L MX
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, Left (MTX-37L)
SOLD SEPARATELY
Fits Chevrolet S10 with shock mounts (driver side only)
LEFT MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Chevrolet S10 with shock mounts.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
RIGHT MX Mount available, part # MTX-37R
(0 reviews) -
CalTracs-MX
CalTracs MX (2300-MX)
Built for:
1967-1969 Chevrolet Camaro
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (1010-MX)
1968-1974 AMX Javelin with inboard shocks behind the springs.***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
-
