CalTracs Pivot Plates
Showing 1–9 of 12 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs Pivot Plates/set of 4 (PL-0422)
SET OF FOUR DRAG PROFILE PLATES, TWO HOLES
Designed for RACING VEHICLES on RACE TRACKS. Two holes for extra clearance. Made with 5/16″ Mild Steel, black powder coated for added durability. 5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, low pro 1 Hole (PL-0521)
SET OF FOUR LOW PROFILE PLATES
Designed for STREET TRUCKS. mostly street driving. Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 3.5″ long, measured from center of spring eye to bottom of plate; approximately 1.5″ more ground clearance for street driving than drag race profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
(0 reviews) -
CalTracs Pivot Plates
Pivot Plates, Low Pro/set of 4 (PL-0421)
SET OF FOUR LOW PROFILE PLATES (two for each side)
LOW PROFILE STANDARD PLATES for CalTracs. Low profile is used primarily for street driving and allows an extra 1.5″ ground clearance compared with drag profile plates. 3.5″ long, measured from center of spring eye to bottom of plate.; allows an extra 1.5″ ground clearance than racing profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
Made with 5/16″ mild steel and black powder coated.
(0 reviews) -
CalTracs Pivot Plates
CalTracs Pivot Plates/set of 4 (PL-0423)
SET OF FOUR PLATES, THREE HOLES
Designed for RACING VEHICLES. Three holes for adjustability on lifted Trucks. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 2 hole (PL-0522)
SET OF FOUR RACING PROFILE PLATES
Designed for RACING TRUCKS. Two Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Monster Pivot Plates, 4 hole (PL-0524)
SET OF FOUR MONSTER PLATES
Designed for LIFTED OR MONSTER RACING TRUCKS. Four Adjustment Holes for maximum adjustability.
Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 3 hole (PL-0523)
SET OF FOUR PLATES
Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
CalTracs Pivot Plates
U-Bolts, Round/set, 2.25″x6″ (UR225x60)
SET OF FOUR ROUND U-BOLTS w/hardware
2.25″ axle diameter x 6″ long, for axle ABOVE springs
Round U-bolts, Grade 5 material, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
2.25″ Axle diameter x 6″ long(UR225X60 shown)
(0 reviews) -
CalTracs Pivot Plates
CalTracs Monster Pivot Plates/set of 4 (PL-0424)
SET OF FOUR MONSTER PLATES, FOUR HOLES
Designed for RACING VEHICLES. Four holes for ultimate adjustability on lifted vehicles. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews)
