Split Mono Leafsprings/pair (320-35)

1973-1987 Chevrolet C-10 Truck (52″)*

*Spring measured center eye to center eye along spring arch.

-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading. Parabolic rear half design distributes the main spring pressure point through the length of the half, reducing spring breakage.

All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

Calvert’s Split Mono Leafsprings for Trucks are available in Stock height as well as -1″ drop. Call for other/custom ride heights.

Please call if you are running on original springs over 20 years old; your ride height may need to be adjusted to achieve expected results.

$459.00

In Stock

Additional information

Weight 47 lbs
Dimensions 65 × 6 × 8 in

GO TO CART

Categories: ,
SKU: 320-35

Recently Viewed:

No recently viewed products to display

Related products

  • Leafsprings

    Split Mono Leafsprings/pair (101-35)

    PRICE PER PAIR

    1968-1970 AMX /Javelin

    +1″ Ride Height

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $459.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair (420-35)

    1963-1976 Dodge Dart

    1962-1976 Dodge Demon

    1964-1969 Plymouth Barracuda

    1970-1976 Plymouth Duster

    1962-1964 Plymouth Savoy

    1960-1976 Plymouth Scamp

    1960-1966 Plymouth Valiant

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $459.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair (380-35)

    1995-2004 Chevrolet S-10 Blazer ONLY

    PRICE PER PAIR, SPLIT MONO LEAFSPRINGS, STOCK HEIGHT

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $459.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair (425-45)

    1965-1973 Dodge Polara

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $498.00 Add to cart