CalTracs Standard (4259)

THIS KIT INCLUDES 2-HOLE PIVOT PLATES.

Designed for applications with inboard springs.

1965-1973 Dodge Polara w/ 3″ stock inboard kit

1971-1973 Plymouth Fury w/ 3″ stock inboard kit

Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.

 

Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.

FULL COLOR INSTALLATION GUIDE INCLUDED.

Complete set includes: 2 Rear Mounts (may differ from photos depending on your application), set of 4 Pivot Plates, set of 4 Heim Joints/Rod Ends,  2 Force Transfer Links, and required hardware.

Please note that this kit was designed to use your  Leafsprings and U-Bolts. U-Bolt sets and specially design CalTracs Wrenches are available separately in CalTracs Replacement Parts or Parts & Accessories.

$429.00

In Stock

Additional information

Weight 27 lbs
Dimensions 24 × 8 × 8 in

GO TO CART

Category:
SKU: 4259

Recently Viewed:

No recently viewed products to display

Related products

    CalTracs - Standard

    CalTracs Standard Low Pro (2201)

    THIS KIT INCLUDES LOW PROFILE (1 Hole) PIVOT PLATES.

    Built for

    1963-1967 Chevrolet Nova Chevy II. Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce rattle.

    Low Profile allows approx. 1.5″ more ground clearance for vehicles used for every day street driving.

    Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
    .
    Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
    .
    NOTE: Part #2301 shown. Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.

    FULL COLOR INSTALLATION GUIDE INCLUDED.

    (0 reviews)
    $399.00 Add to cart
    CalTracs - Standard

    CalTracs Standard Low Pro (2381)

    THIS KIT INCLUDES LOW PROFILE (1 Hole) PIVOT PLATES.

    Low Profile allows approx. 1.5″ more ground clearance for vehicles used for every day street driving.

    1967-1978 Chevrolet Nova

    1971-1977 Oldsmobile Omega

    1974 Pontiac GTO

    1971-1977 Pontiac Ventura

    Fits Ford 9″  with GM, Ford, or Universal perch.

    Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce rattle.

    Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
    .
    Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
    .
    NOTE: Part #2301 shown. Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.

    FULL COLOR INSTALLATION GUIDE INCLUDED.

    (0 reviews)
    $399.00 Add to cart
    CalTracs - Standard

    CalTracs Standard (6800)

    THIS KIT INCLUDES 2-HOLE PIVOT PLATES.

    Built for:

    1967-1973 Mercury Cougar

    Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.

    Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
    .
    Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
    .
    NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.

    FULL COLOR INSTALLATION GUIDE INCLUDED.

    (0 reviews)
    $399.00 Add to cart
    CalTracs - Standard

    CalTracs Standard (6220)

    THIS KIT INCLUDES 2-HOLE PIVOT PLATES.

    Built for:

    1963-1964 Ford Galaxie

    NOTE: Hanger modification required. See graphic for basic instructions. Photos of actual install/modification, click HERE.  Call 661-728-9600 during regular business hours if you have questions.

    Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.

    NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.

    FULL COLOR INSTALLATION GUIDE INCLUDED.

    (0 reviews)
    $399.00 Add to cart