2.75 ” Axle Perch/pair (HDP-275)

SPRING PERCHES FOR 2.75″ AXLE TUBE

Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.

Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.

Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″

WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$50.00

In Stock

2.75 " Axle Perch/pair (HDP-275)
2.75 " Axle Perch/pair (HDP-275) - Image 2
2.75 " Axle Perch/pair (HDP-275) - Image 3
2.75 " Axle Perch/pair (HDP-275) - Image 4
Calvert Patented HD Spring Perches

Additional information

Weight 4 lbs
Dimensions 7.25 × 3.25 × 3.25 in

GO TO CART

Categories: ,
SKU: HDP-275

Recently Viewed:

No recently viewed products to display

Related products

    Accessories

    U-Bolts, Round/set, 3.25″x9″ (UR325x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3.25″ axle diameter x 9″ long, axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    U-Bolts, Round/set, 2.75″x7″ (UR275x70)

    SET OF FOUR ROUND U-BOLTS w/hardware

    2.75″ axle diameter x 7″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    HANGERS/SET (H1510)

    1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)

    Designed to work directly with CalTracs. These hangers replace the original front hangar plates.

    These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.

    Includes (2) two hangers and required hardware.

    NOTE: These will not fit long bed models or 454SS. without modification

    (0 reviews)
    $175.00 Add to cart
    Accessories

    U-Bolts, Round/set 3″x9″ (UR300x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3″ axle diameter x 9″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Read more