SET OF TWO
1.25″ diameter x 31″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
$90.00
In Stock
SET OF FOUR LOW PROFILE PLATES
Designed for STREET TRUCKS. mostly street driving. Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 3.5″ long, measured from center of spring eye to bottom of plate; approximately 1.5″ more ground clearance for street driving than drag race profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
SET OF FOUR PLATES
Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
SOLD SEPARATELY
LEFT Rod End/Heim joint for HD TRUCK CalTracs Force Transfer Links. Rod Ends are Teflon ™ coated on the spherical end to reduce noise. NOTE: These joints cannot be greased; the grease will degrade the coating which will interfere with free movement.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
RIGHT rod end available, part # XMR-12
SOLD SEPARATELY
LEFT rod end/Heim joint for standard CalTracs Force Transfer Links.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
RIGHT rod end available, part # CMR-12