SPRING SHACKLES/set (SH-300x562A)

Calvert Racing Shackle and Bushing set for A-Body Mopar products.

Set includes two shackles and a total of eight polyurethane bushings (4 for the rear eye of the spring and 4 for the upper frame shackle). The shackles retain a 1/2″ shouldered bolt that necks down to a 3/8″ thread, 3-1/2″ center to center. Required nuts included.

NOTE: SHACKLES SHOULD MOVE FREELY WHEN VEHICLE IS ON THE GROUND. VERIFY BY WATCHING THE INSTALLED SHACKLE AND SPRING WHILE SOMEONE BOUNCES ON THE BUMPER.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$90.00

In Stock

Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A
Spring Shackles - A Body SH300x562A

Additional information

Weight 3 lbs
Dimensions 10 × 7 × 3 in

GO TO CART

Categories: ,
SKU: SH-300x562A

Recently Viewed:

No recently viewed products to display

Related products

  • SPRING SLIDERS for Calvert Springs (SL-300CR )
    Accessories

    SPRING SLIDERS for Calvert Springs (SL-300CR )

    SET OF TWO SPRING SLIDERS

    Designed to fit Calvert Leafsprings installed on ALL CARS & TRUCKS (except Chevy Bel Air). Outside diameter aluminum bushings: 1″.

    May also fit most Chrysler factory springs due to rear bearing size.

    Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.

    (0 reviews)
    $190.00 Add to cart
  • U-Bolts, Round/set, 2.75"x7" (UR275x70)
    Accessories

    U-Bolts, Round/set, 2.75″x7″ (UR275x70)

    SET OF FOUR ROUND U-BOLTS w/hardware

    2.75″ axle diameter x 7″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Read more
  • HANGERS/SET (H1510)
    Accessories

    HANGERS/SET (H1510)

    1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)

    Designed to work directly with CalTracs. These hangers replace the original front hangar plates.

    These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.

    Includes (2) two hangers and required hardware.

    NOTE: These will not fit long bed models or 454SS. without modification

    (0 reviews)
    $175.00 Add to cart
  • U-Bolts, Round/set 3"x9" (UR300x90)
    Accessories

    U-Bolts, Round/set 3″x9″ (UR300x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3″ axle diameter x 9″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart