SPRING SHACKLES/set (SH-435×562)

Calvert Racing Shackle and Bushing set

Fits: GM vehicles with factory MONO leafsprings.

Replace old worn out shackles and bushings with a fresh new set, including rubber bushings for the upper frame and rear spring eyes. 3-3/8″ center to center. Sold as a pair, required hardware included.

NOTE: SHACKLES SHOULD MOVE FREELY WHEN VEHICLE IS ON THE GROUND. VERIFY BY WATCHING THE INSTALLED SHACKLE AND SPRING WHILE SOMEONE BOUNCES ON THE BUMPER.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$130.00

In Stock

SPRING SHACKLES/set (SH-435x562)
SPRING SHACKLES/set (SH-435x562) - Image 2

Additional information

Weight 6.25 lbs
Dimensions 11.5 × 8.5 × 5 in

GO TO CART

Categories: ,
SKU: SH-435x562

Recently Viewed:

No recently viewed products to display

Related products

  • U-Bolts, Round/set 3"x9" (UR300x90)
    Accessories

    U-Bolts, Round/set 3″x9″ (UR300x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3″ axle diameter x 9″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
  • U-Bolts, Square/set, 3"x11" (SQ300x1100)
    Accessories

    U-Bolts, Square/set, 3″x11″ (SQ300x1100)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 11″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $65.00 Add to cart
  • U-Bolts, Square/set, 2.5"x11.5" (SQ250x1150)
    Accessories

    U-Bolts, Square/set, 2.5″x11.5″ (SQ250x1150)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    2.5″ axle diameter x 11.5″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $65.00 Add to cart
  • HANGERS/SET (H1510)
    Accessories

    HANGERS/SET (H1510)

    1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)

    Designed to work directly with CalTracs. These hangers replace the original front hangar plates.

    These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.

    Includes (2) two hangers and required hardware.

    NOTE: These will not fit long bed models or 454SS. without modification

    (0 reviews)
    $175.00 Add to cart