SPRING SHACKLES/set (SHU-300x500A)

Calvert Racing Universal Shackle and Bushing set for vehicles with 1″ Bushing/with Calvert Racing Split Mono Leafsprings

1962 – 1965 Ford Fairlane

This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$89.00

In Stock

SPRING SHACKLES/set (SHU-300x500A)

Additional information

Weight 3 lbs
Dimensions 10 × 7 × 3 in

GO TO CART

Categories: ,
SKU: SHU-300x500A

Recently Viewed:

No recently viewed products to display

Related products

    Accessories

    HANGERS/SET (H1510)

    1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)

    Designed to work directly with CalTracs. These hangers replace the original front hangar plates.

    These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.

    Includes (2) two hangers and required hardware.

    NOTE: These will not fit long bed models or 454SS. without modification

    (0 reviews)
    $175.00 Add to cart
    Accessories

    U-Bolts, Square/set, 3″x18″ (SQ300x1800)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 18″ long, heavy duty 5/8″ diameter u-bolts. Axle BELOW springs.

    We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $100.00 Add to cart
    Accessories

    U-Bolts, Square/set, 3″x9″ (SQ300x900)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 9″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart
    Accessories

    U-Bolts, Square/set, 3″x15″ (SQ300x1500)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 15″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    SQUARE U-BOLTS (spring OVER axle): We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart