SPRING SHACKLES/set (SH-325x562GM)

Calvert Racing Shackle and Bushing set

Fits: GM cars with factory MULTI leafsprings.

Replace old worn out shackles and bushings with a fresh new set, including rubber bushings for the upper frame and rear spring eyes, 3-1/4″ center to center. Sold as a pair, required hardware included.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$129.00

In Stock

SPRING SHACKLES/set (SH-325x562GM)

Additional information

Weight 6.25 lbs
Dimensions 11.5 × 8.5 × 5 in

GO TO CART

Categories: ,
SKU: SH-325x562GM

Recently Viewed:

No recently viewed products to display

Related products

    Accessories

    3″ Axle Perch/pair (HDP-300)

    SPRING PERCHES FOR 3″ AXLE TUBE

    Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.

    Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.

    Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″

    WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.

     

    (0 reviews)
    $50.00 Add to cart
    Accessories

    U-Bolts, Round/set 3″x9″ (UR300x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3″ axle diameter x 9″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Read more
    Accessories

    U-Bolts, Round/set, 3″x7″ (UR300x70)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3″ axle diameter x 7″ long, for axle ABOVE springs

    Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.

    NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with  7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.

    (UR275x70 shown)

    (0 reviews)
    $35.00 Add to cart
    Accessories

    U-Bolts, Square/set, 2.5″x11.5″ (SQ250x1150)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    2.5″ axle diameter x 11.5″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart