U-Bolts, Square/set, 3″x9″ (SQ300x900)

SET OF FOUR SQUARE U-BOLTS w/hardware

3″ axle diameter x 9″ long, axle BELOW springs.

Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.

(SQ300x900 shown)

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$60.00

In Stock

Additional information

Weight 14 lbs
Dimensions 11 × 6 × 4 in

GO TO CART

Categories: , ,
SKU: SQ300x900

Recently Viewed:

No recently viewed products to display

Related products

    CalTracs Replacement Parts

    CalTracs HD ROD END LH (XML-12)

    SOLD SEPARATELY

    LEFT Rod End/Heim joint for HD TRUCK CalTracs Force Transfer Links. Rod Ends are Teflon ™ coated on the spherical end to reduce noise. NOTE: These joints cannot be greased; the grease will degrade the coating which will interfere with free movement.

    3/4″ rod ends have a radial static load capacity of over 14,000 pounds.

    RIGHT rod end available, part # XMR-12

    (0 reviews)
    $30.00 Add to cart
    CalTracs Replacement Parts

    CalTracs HD Rear Spring Mount (MT-2504)

    SOLD SEPARATELY

    Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 4″ diameter axle AND 3″ wide leafspring.

    Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.

    MOUNT FITS LEFT OR RIGHT SIDE.

    (0 reviews)
    $90.00 Add to cart
    CalTracs Replacement Parts

    CalTracs HD Pivot Plates, 3 hole (PL-0523)

    SET OF FOUR PLATES

    Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.

    IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.

    NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.

    (0 reviews)
    $80.00 Add to cart
    CalTracs Replacement Parts

    CalTracs Force transfer Links/pair- 15.5″ (L130-155-190)

    SET OF TWO

    1.25″ diameter x 15.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.

    Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.

    (0 reviews)
    $90.00 Add to cart