CF Series BLEMISHED Front Racing Shocks/pair (BCF43093)

BLEMISHED SHOCKS. May have scratches or dings on outer shell. Tested for performance.

BUICK: 1973-1978 Apollo, 1973-1987 Regal/Grand National, 1964-1979 Skylark GS

CHEVROLET: 1967-1981 Camaro, 1964-1983 Chevelle, 1963-1987 Corvette, 1964-1983 Malibu, 1968-1978 Nova, 1985-2002 S10

DODGE: 1994-2003 Dakota, 1994-2003 Dakota RT

FORD:  1966-1979 Fairlane, 1972-1979 Ranchero

OLDSMOBILE: 1964-1988 Cutlass, 1968-1971 442, 1973-1979 Omega

PONTIAC: 1967-1981 Firebird/TransAm, 1969-1987 Grand Prix, 1964-1974 GTO, 1964-1981 LeMans, 1971-1977 Ventura

Collapsed Length: 9.18″, Extended Length: 14.37″ *

* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.

Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.

Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.

PHOTO does not show actual blemished shocks.

NOTE: DRAG SHOCKS ONLY, NOT FOR HIGHWAY USE.

Sold as a pair. Includes required hardware. If your application’s ride height has been changed, please call Calvert Racing at 661-728-9600 before ordering.

Original price was: $148.00.Current price is: $110.00.

Out of stock

Additional information

Weight 7 lbs
Dimensions 15 × 5 × 3 in

Out of stock

GO TO CART

Category:
SKU: BCF43093

Recently Viewed:

No recently viewed products to display

Related products

    AUSTRALIA

    CF Series Front Racing Shocks/pair (CF42103)

    DODGE: 1970-1974 Challenger, 1966-1972 Charger, 1965-1972 Coronet, 1963-1976 Dart, 1962-1976 Demon, 1965-1978 Monaco, 1965-1973 Polara, 1975-1976 Royal Monaco, 1963-1976 Swinger

    PLYMOUTH: 1964-1969 Barracuda, 1964-1969 Cuda, 1965-1970 Belvedere, 1970-1976 Duster, 1962-1964 Fury, 1966-1978 Fury, 1975-1977 Grand Fury, 1967-1971 GTX, 1968-1972 Road Runner, 1965-1972 Satellite, 1962-1964 Savoy, 1960-1976 Scamp, 1960-1966 Valiant

    AUSTRALIAN: 1962-1981 Valiant

    Collapsed Length: 9.82″, Extended Length: 15.75″ *

    * Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.

    Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
    Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.

    (0 reviews)
    $148.00 Add to cart
    CF Series 90/10 Race Shocks

    CF Series Front Racing Shocks/pair (CF45103)

    1962-1967 Chevrolet Nova Chevy II

    Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
    Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.

    (0 reviews)
    $178.00 Add to cart
  • Sale!
    CR Series 9 Way Adjustable SHocks

    CR Series BLEMISHED Rear Shocks/pair (BCR22116)

    PAIR BLEMISHED SHOCKS: May contain scratches or dings on outer shell. Tested for performance.

    Collapsed Length: 11.58″, Extended Length: 17.5″ *

    * Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.

    Please call if you have any questions.

    Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
    Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.

    PHOTOS do not show actual blemished shock.

    (0 reviews)
    Original price was: $288.00.Current price is: $230.00. Add to cart
    CF Series 90/10 Race Shocks

    CF Series Front Racing Shocks/pair (CF22103)

    CHEVROLET: 1973-1987 C10

    Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.

    Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.

    Collapsed Length: 10.5″, Extended Length: 16″ *

    * Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.

     

    (0 reviews)
    $198.00 Add to cart