Shop
Showing 352–360 of 661 resultsSorted by popularity
-
Accessories2.5 ” Axle Perch/pair (HDP-250)
SPRING PERCHES FOR 2.5″ AXLE TUBE
Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.
Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.
Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″
WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-64)
1964-1973 Ford Mustang
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair (CR42116)
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Custom Shock. For vehicles that have relocated shocks inboard behind the axle. Please call for more information, 661-728-9600, Monday-Friday, 8am-4:30pm PST.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR22131)
PAIR BLEMISHED UNIVERSAL SHOCKS: May contain scratches or dings on outer shell. Tested for performance.
Universal 9-Way Adjustable Shock pair. Designed for vehicles that fit shocks with 1/2″ eyelet on BOTH ends.
Ride Height: 15″ – 16″ (Measure center eyelet to eyelet with car on the ground and weight on the tires.)
Collapsed/Extended Length: 13-1/8″ / 20″
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.PHOTOS do not show actual blemished shock.
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-270-295-330)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 29.5″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-435×562)
Calvert Racing Shackle and Bushing set
Fits: GM vehicles with factory MONO leafsprings.
Replace old worn out shackles and bushings with a fresh new set, including rubber bushings for the upper frame and rear spring eyes. 3-3/8″ center to center. Sold as a pair, required hardware included.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-74)
1999-2007 Ford F250/350 Super Duty
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushings for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-73A)
2010-2014 Ford F150
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x13.5″ (SQ300x1350)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 13.5″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
SQUARE U-BOLTS (spring OVER axle): We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews)
