Shop
Showing 442–450 of 661 resultsSorted by popularity
-
Lifestyle3XL Navy Zippered Hoodie Sweatshirt (zh-3XN)
NEW SIZE! 3X LARGE ZIPPERED HOODIE
Medium weight hoodie with full length zipper and front pockets. 80% Cotton/20% Polyester for fit and comfort. Silk screened front and back. Machine washable, cold with like colors.
Available in limited quantities in L, XL, 2XL, 3XL only. PLEASE NOTE: These hoodies run a bit narrow and long.
(ZH-LN shown)
(0 reviews) -
Lifestyle
2022 Media Set (LS-Media22)
A GREAT GIFT for the racing or car enthusiast!
INCLUDES: Calvert Racing Banner, 2022 Limited Edition Calendar, Two Can Coolers, 1 Calvert Shopping bag
2022 Limited Edition Calendar: Custom designed by Calvert Racing, these colorful, high quality wall calendars feature photos from 24 actual Calvert Racing customers. Every month features a photo of a new vehicle, plus a special double centerfold! Date blocks offer plenty of room for notes. Size: 8.5″ x 11″ folded, 11″ x 17″ hanging, drilled hole.
Calvert Racing Banner: 3ft x 1ft vinyl banner with heat sealed seams and heavy duty grommets for hanging at the track, workshop or in your garage!
Can Coolers: Set of Two Coozies to keep your beverages cool or warm! Royal blue with white logo. Flat size: 4″ x 5″, holds 2.5″ diameter can or bottle.
Reusable Shopping Bag: Shopping bag has 8 1/2″x12″ gusseted bottom, 12″ tall, plenty of room for the track, or regular shopping!
A $35 value!
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair Stock Height (102-34)
PRICE PER PAIR
1971-1974 AMC Javelin
STOCK HEIGHT SPLIT MONO LEAFSPRINGS
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair +1″ Height (103-35)
PRICE PER PAIR
1970-1977 AMC Hornet
+1″ HEIGHT SPLIT MONO LEAFSPRINGS
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR34136)
PAIR BLEMISHED SHOCKS: May contain scratches or dings on outer shell. Tested for performance.
Please call if you have any questions.
Collapsed Length: 14″, Extended Length: 23-1/4″, Approx. Ride Height: 16-1/2″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.PHOTOS do not show actual blemished shock.
(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR22150)
PAIR BLEMISHED SHOCKS: May contain scratches or dings on outer shell. Tested for performance.
Please call if you have any questions.
Collapsed Length: 15″, Extended Length: 23-3/4″, Approx. Ride Height: 17″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.PHOTOS do not show actual blemished shock.
(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR44116)
PAIR BLEMISHED SHOCKS: May contain scratches or dings on outer shell. Tested for performance.
Please call if you have any questions.
Collapsed Length: 11-5/8″, Extended Length: 17-7/8″, Approx. Ride Height: 15-1/2 – 16″
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.PHOTOS do not show actual blemished shock.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair +1″ Height (321-36)
1973-1987 Chevrolet C-10 Truck (56″)*
*Spring measured center eye to center eye along spring arch.
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading. Parabolic rear half design distributes the main spring pressure point through the length of the half, reducing spring breakage.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. Racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
CalTracs - Trucks
CalTracs Truck (8230)
2017-2020 Toyota Tacoma (price includes refundable core charge. See below*)
Designed especially for trucks. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
*Price includes a $200 core charge. This is REFUNDED upon return of the original rear mounts to Calvert Racing. Please call 661-728-9600 for details and RMA number before returning.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.
(0 reviews)
