Accessories
Showing 82–90 of 110 resultsSorted by popularity
-
AccessoriesSHACKLE BUSHINGS/kit MOPAR (M20694)
UPPER FRAME RAIL POLY BUSHING KIT (REPLACEMENT)
Fits most MOPAR vehicles. 1″ Outer Diameter, 1/2″ Inner Diameter
Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
M20697 SHOWN.
(0 reviews) -
Accessories
TIE DOWN BRACKETS/PAIR (TD-190TM)
TIE DOWN BRACKETS FOR Series 2500-3500 TRUCKS – SET OF TWO (90 degree angle)
3/8″ Zinc-Plated Steel, 90 degree angle. Overall size: 6-1/4″ wide” x 3″ tall; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
DESIGNED TO FIT CALTRACS REAR MOUNTS:
MT-2501 (3.25″ Axle Truck)
MT-2502 (3.5″ Axle Truck)
MT-2503 (3.5″ Axle Truck with 3″ wide springs)
MT-2504 (Ram 2500/3500: 4″ Axle, 3″ spring)
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps.TD-45 Shown mounted on graphic(0 reviews) -
Accessories
SPRING SHACKLES/set (SHU-300×500)
Calvert Racing Shackle and Bushing set for 62-65 Fairlane.
Universal Shackles for vehicle with Calvert Split Mono Leafsprings with 1/2″ bolt and 1″ OD (outer diameter) bushings top and bottom, 3-1/2″ center to center.
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included.
(0 reviews) -
Accessories
2.5 ” Axle Perch/pair (HDP-250)
SPRING PERCHES FOR 2.5″ AXLE TUBE
Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.
Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.
Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″
WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-64)
1964-1973 Ford Mustang
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye, 1 grease packet.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-73A)
2010-2014 Ford F150
Kit includes two aluminum bushings and 2 steel inserts, one grease packet for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-61)
1960-1963 Ford Falcon
Kit includes two aluminum bushings and 2 steel inserts, one grease packet for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/EACH (B-250-100-250)
ALUMINUM BUSHING ONLY (does not include inner sleeve)
SOLD INDIVIDUALLY
(0 reviews) -
Accessories
STRUT ROD KIT/pair with Mounts (SR-63)
Built for 1962-1965 Ford Fairlane. Includes Mounts.
Sold as a pair.(SR-63 shown)
(0 reviews)
