Accessories
Showing 37–45 of 117 resultsSorted by popularity
-
AccessoriesHD SPRING CLAMPS/set of 2 (SCH-15)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1.5″ deep
Heavy duty steel, zinc coated spring clamps designed for Calvert Racing’s Split Mono Leafsprings. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
These clamps require a chamfered 3/8″ hole be drilled into the leaf for the rivet to be inserted and pressed to secure. NOTE: Back of spring , drill/chamfer the bottom spring. For the front of the spring, drill/chamfer the top spring.
Be sure to measure your springs to make sure the clamps will fit.
SCH-10 shown.
(0 reviews) -
Accessories
HANGERS/SET (H1510)
1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)
Designed to work directly with CalTracs. These hangers replace the original front hangar plates.
These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.
Includes (2) two hangers and required hardware.
NOTE: These will not fit long bed models or 454SS. without modification
(0 reviews) -
Accessories
HANGER/SHACKLE KIT (H64K)
1962-1965 Ford Fairlane
Designed to work directly with CalTracs. These hangers replace the original front hangar plates. Includes Hangers and Rear Shackles and is required when equipping your vehicle with CalTracs and Calvert Springs.
Kit includes set of two Hangers and two Shackles. Also includes two grade 8 spring eye bolts/nuts, six bolts that mount the hangars to the chassis, six J-clips.
(0 reviews) -
Accessories
HD SPRING CLAMPS/set of 2 (SCH-10)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1″ deep
Heavy duty steel, zinc coated spring clamps designed for Calvert Racing’s Split Mono Leafsprings. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
These clamps require a chamfered 3/8″ hole be drilled into the leaf for the rivet to be inserted and pressed to secure. NOTE: Back of spring , drill/chamfer the bottom spring. For the front of the spring, drill/chamfer the top spring.
Be sure to measure your springs to make sure the clamps will fit.
SCH-10 shown.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-33)
1988-1998 Chevrolet/GM 1500, 2500, 3500 Series
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
SPRING SLIDERS for 55-57 Chevy (SL-30055 )
SET OF TWO SPRING SLIDERS
1955-1957 Chevrolet Bel AirSliders replace spring shackles. Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x6″ (UR250x60)
SET OF FOUR ROUND U-BOLTS w/hardware
2.5″ axle diameter x 6″ long
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR250x60 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-21)
1955-1957 Chevrolet Bel Air
Kit includes two aluminum bushings, 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-22)
1963-1967 Chevrolet Nova
1963-1967 Chevy II
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews)
