Accessories
Showing 46–54 of 108 resultsSorted by popularity
-
AccessoriesALUMINUM BUSHING/SET (BK-22)
1963-1967 Chevrolet Nova
1963-1967 Chevy II
Kit includes two aluminum bushings and 2 steel inserts, one grease packet for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
HD SPRING CLAMPS/set of 2 (SCH-10)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1″ deep
Heavy duty steel, zinc coated spring clamps. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
SCH-10 shown.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-21)
1955-1957 Chevrolet Bel Air
Kit includes two aluminum bushings, 2 steel inserts, one grease packet for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(0 reviews) -
Accessories
FLIP CONVERSION KIT 1500 Series Trucks w/CalTracs INSTALLED (FLP-3132)
FLIP CONVERSION KIT for 1500 SERIES TRUCKS (for CalTracs)
1967-2019 Chevrolet Silverado and GMC Sierra Trucks
Basic FLIP CONVERSION KIT for 1500 Series Trucks with CalTracs* and a 3.25″ axle tube and 2.5″ wide spring* already installed.
Includes: Two Rear Mounts, Two patented Calvert Heavy Duty Perches, and set of Four U-Bolts with hardware.
A flip kit moves the axle from beneath the leaf spring to on top of the leaf spring, which lowers the truck.
ALSO AVAILABLE: Flip kit for 3″ axle tube and 2.5″ wide spring, part #FLP-3134
*THIS CONVERSION KIT DOES NOT INCLUDE CALTRACS.
(0 reviews) -
Accessories
HANGERS/SET (H23)
1967-1969 Chevrolet Camaro
1967-1969 Pontiac Firebird
Designed to work directly with our CalTrac bar kits. These hangers replace the original front hangar plates.
Includes (2) two hangers and a hardware, leaf spring eye bolts and nuts, along with the bolts and clips that mount the hangar to the vehicle chassis.
(0 reviews) -
Accessories
MULTI SPRING CLAMPS/set of 6 (SCQ-01)
SPRING REBOUND STABILIZING CLAMPS FOR 2.5″ MULTI-SPRING/SET OF SIX
Rebound Stabilizing/Alignment fold over, quick on clamps 2.5″ wide multi-leafspring. See Graphic for recommended placement.
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x11″ (SQ300x1100)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 11″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews) -
Accessories
4 Degree/2″ PINION SHIMS/PAIR (4-D2)
4 DEGREE SHIMS – SET OF TWO
2″ wide. Fits 1.75′ – 2″ wide springs.
Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum.
NOW INCLUDES CENTER PIN LOCATOR BOLTS TO FIT ONTO CALVERT RACING SPLIT MONO LEAFSPRINGS. If you have a multi-springpack, you may need longer bolts.
Also available: 4 degree pinion shims
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x9″ (SQ300x900)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 9″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews)
