CalTracs Replacement Parts
Showing 1–9 of 130 resultsSorted by popularity
-
Accessories
U-Bolts, Round/set, 3″x7″ (UR300x70)
SET OF FOUR ROUND U-BOLTS w/hardware
3″ axle diameter x 7″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Replacement Parts
CalTracs Wrenches/pair (WR-01)
SET OF TWO WRENCHES
Calvert Racing specially designed wrenches make it easy to adjust your CalTracs traction bar system. The wrenches have 1-1/8″ opening to fit CalTracs links and jamnuts. The short handle features an offset/angled head helps in low/tight clearance applications where space to work is limited.
Wrenches are laser cut, heat treated 5/16″ thick x 6″ long 4340 Chromoly for durability and longevity, finished in a clear anodized zinc plating to resist corrosion. Rubberized grip for comfort and to reduce slippage. MADE IN USA
(0 reviews) -
Accessories
U-Bolts, Round/set 3″x9″ (UR300x90)
SET OF FOUR ROUND U-BOLTS w/hardware
3″ axle diameter x 9″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Replacement Parts
CalTracs ROD END RH DISCONTINUED (BCMR-12)
DISCONTINUED PART – SOLD SEPARATELY – LIMITED QUANTITIES
RIGHT rod end/Heim joint for standard CalTracs Force Transfer Links.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
(0 reviews) -
CalTracs Replacement Parts
CalTracs ROD END LH (CML-12) DISCONTINUED
SOLD SEPARATELY
LEFT rod end/Heim joint for standard CalTracs Force Transfer Links.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
RIGHT rod end available, part # CMR-12
(0 reviews) -
CalTracs Replacement Parts
CalTracs ROD END LH (CML-12Z)
SOLD SEPARATELY
LEFT rod end/Heim joint for standard CalTracs Force Transfer Links. NOW COMES WITH GREASE ZERK PORT and GREASE PACKET. Add a small amount of grease to minimize rattle.
3/4″ rod ends have a radial static load capacity of over 15,000 pounds.
RIGHT rod end available, part # CMR-12Z
(0 reviews) -
CalTracs Replacement Parts
CalTracs ROD END RH (CMR-12Z)
SOLD SEPARATELY
RIGHT rod end/Heim joint for standard CalTracs Force Transfer Links. NOW COMES WITH GREASE ZERK PORT and GREASE PACKET. Add a small amount of grease to minimize rattle.
3/4″ rod ends have a radial static load capacity of over 15,000 pounds.
LEFT rod end available, part # CML-12z
(0 reviews) -
CalTracs Replacement Parts
CalTracs HD ROD END LH (XML-12)
SOLD SEPARATELY
LEFT Rod End/Heim joint for HD TRUCK CalTracs Force Transfer Links. Rod Ends are Teflon ™ coated on the spherical end to reduce noise. NOTE: These joints cannot be greased; the grease will degrade the coating which will interfere with free movement.
3/4″ rod ends have a radial static load capacity of over 28,000 pounds.
RIGHT rod end available, part # XMR-12
(0 reviews) -
CalTracs Replacement Parts
CalTracs HD ROD END RH (XMR-12)
SOLD SEPARATELY
RIGHT Rod End/Heim joint for HD TRUCK CalTracs Force Transfer Links. Rod Ends are Teflon ™ coated on the spherical end to reduce noise. NOTE: These joints cannot be greased; the grease will degrade the coating which will interfere with free movement.
3/4″ rod ends have a radial static load capacity of over 28,000 pounds.
LEFT rod end available, part # XML-12
(0 reviews)






















