CalTracs Replacement Parts
Showing 100–108 of 130 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1962-1967
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, Right (MTX-37R)
SOLD SEPARATELY
Fits Chevrolet S10 with shock mounts (passenger side only)
RIGHT MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
LEFT MX Mount available, part # MT-37L MX
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, Left (MTX-37L)
SOLD SEPARATELY
Fits Chevrolet S10 with shock mounts (driver side only)
LEFT MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Chevrolet S10 with shock mounts.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
RIGHT MX Mount available, part # MTX-37R
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x6″ (DUR250X60)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 2.5″ axle ( 2.5″ inside diameter x 6″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.25″x6″ (DUR225X60)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 2.25″ axle ( 2.25″ inside diameter x 6″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 26″ (L235-260-295)
SET OF TWO
1.25″ diameter x 26″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 16″ (L135-160-195)
SET OF TWO
1.25″ diameter x 16″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Sale!Accessories
U-Bolts, Square/set, 3″x13.5″ (CSQ300x1350)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter (3-1/16″ inside diameter x 13-1/2″ long, 4″ thread length.
Square U-bolts, raw Grade 5 material,5/16″ diameter. Set includes 4 U-bolts, nuts and washers. Not shown, 2 top plates.
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-295-320-355)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bar and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 32″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER
(0 reviews)
