Mono Leafsprings
Showing 1–9 of 13 resultsSorted by popularity
-
LeafspringsParabolic Mono Leafsprings -2″ Drop (PS210-09)
1955-1957 Chevrolet BelAir
-2″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings Stock Height (PS210-13)
1955-1957 Chevrolet BelAir
STOCK HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -3″ Drop (PS210-07)
1955-1957 Chevrolet BelAir
-3″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -1″ Drop (PS210-11)
1955-1957 Chevrolet BelAir
-1″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings +1″ Height (PS210-15)
1955-1957 Chevrolet BelAir
+1″ HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -1″ DROP (PS230-8)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, – 1 INCH DROP height
FOR RACING VEHICLE UNDER 3,000 POUNDS WITH CENTER SPRING EYES
Narrower width allows for better side tire clearance, up to 1/4″
1967-1981 Chevrolet Camaro
1968-1978 Chevrolet Nova
PLEASE CALL TO VERIFY IF THESE WILL FIT YOUR VEHICLE. 661-728-9600, M-F, 8am-4:30pm Pacific time.
Also available, -1″ drop, part # PS230-6
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings. Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing. LIMITED QUANTITY AVAILABLE, ONLY THROUGH CALVERT RACING.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings STOCK HEIGHT (PS230-6)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, Stock height (also available, 1″ DROP, part # PS230-8)
Narrower width allows for better side tire clearance, up to 1/4″
FOR RACING VEHICLE UNDER 3,000 POUNDS WITH CENTER SPRING EYES
1967-1981 Chevrolet Camaro
1968-1978 Chevrolet Nova
PLEASE CALL TO VERIFY IF THESE WILL FIT YOUR VEHICLE. 661-728-9600, M-F, 8am-4:30pm Pacific time.
Also available, -1″ drop, part # PS230-6
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings (PS420-6)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, LIMITED QUANTITIES AVAILABLE
Narrower width allows for better side tire clearance, up to 1/4″
Mopar A-Body, Stock Height
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings (PS640-4)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, LIMITED QUANTITIES AVAILABLE
Narrower width allows for better side tire clearance, up to 1/4″
1964-1966 Ford Mustang, Stock Height
1967-1973 Ford Mustang, -1 In Drop
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
