Parabolic Mono Leafsprings -1″ DROP (PS230-8)

2″ WIDE MONO PARABOLIC LEAFSPRINGS, – 1 INCH DROP height 

FOR RACING VEHICLE UNDER 3,000 POUNDS WITH CENTER SPRING EYES

Narrower width allows for better side tire clearance, up to 1/4″

1967-1981 Chevrolet Camaro

1968-1978 Chevrolet Nova

PLEASE CALL TO VERIFY IF THESE WILL FIT YOUR VEHICLE. 661-728-9600, M-F, 8am-4:30pm Pacific time.

Also available, -1″ drop, part # PS230-6

Alternative for aftermarket spring. Substantially lighter than multi-leafsprings. Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is  arch verified. Center pins and bushings included.

CalTracs solid Bushings included when ordered directly from Calvert Racing. LIMITED QUANTITY AVAILABLE, ONLY THROUGH CALVERT RACING.

NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

Please call if you are running on original or springs over 20 years old; your ride height may need to be adjusted to achieve expected results.

$520.00

In stock

Parabolic Mono Leafsprings -1" DROP (PS230-8)
Parabolic Mono Leafsprings -1" DROP (PS230-8) - Image 2
Parabolic Mono Leafsprings -1" DROP (PS230-8) - Image 3
Parabolic Mono Leafsprings -1" DROP (PS230-8) - Image 4

Additional information

Weight 60 lbs
Dimensions 65 × 5 × 8 in

In stock

GO TO CART

Categories: ,
SKU: PS230-8

Recently Viewed:

No recently viewed products to display

Related products

  • Split Mono Leafsprings/pair Stock Height (620-36)
    Leafsprings

    Split Mono Leafsprings/pair Stock Height (620-36)

    1959-1962 Ford Galaxie

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $460.00 Add to cart
  • Split Mono Leafsprings/pair +1" Height (640-35)
    Leafsprings

    Split Mono Leafsprings/pair +1″ Height (640-35)

    1964-1965 Ford Falcon

    1964-1973 Ford Mustang

    SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $460.00 Add to cart
  • Split Mono Leafsprings/pair Stock Height (421-36)
    Leafsprings

    Split Mono Leafsprings/pair Stock Height (421-36)

    1974 Dodge Charger

    1965 Dodge Coronet

    1964 Dodge Polara

    1964 Plymouth Fury

    1965 Plymouth Belvedere

    1974-1975 Plymouth Road Runner

    1965 Plymouth Satellite

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $495.00 Add to cart
  • Split Mono Leafsprings/pair Stock Height (610-36)
    Leafsprings

    Split Mono Leafsprings/pair Stock Height (610-36)

    1960-1963 Ford Falcon

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $460.00 Add to cart