parts
Showing 136–144 of 204 resultsSorted by popularity
-
AccessoriesSHACKLE BUSHINGS/kit MOPAR (M20694)
UPPER FRAME RAIL POLY BUSHING KIT (REPLACEMENT)
Fits most MOPAR vehicles.ย 1″ Outer Diameter, 1/2″ Inner Diameter
Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
M20697 SHOWN.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 25″ (L225-250-285)
SET OF TWO
1.25″ diameter x 25″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs Pivot Plates
CalTracs Pivot Plates/set of 4 for ’55-’57 Chevrolet (PL-0124)
DESIGNED FOR 1955-1957 CHEVROLET
SET OF FOUR PLATES
Made with 5/16″ Mild Steel, black powder coated for added durability. 5.75″ long.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-250-275-310)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 27.5″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
(0 reviews) -
Accessories
MULTI SPRING CLAMPS/set OF 6 (SCQ-03)
SPRING REBOUND STABILIZING CLAMPS FOR 3″ MULTI-SPRING/SET OF SIX
Rebound Stabilizing/Alignment fold over, quick on clamps 3″ wide multi-leafsprings, helps reduce leaf separation during launch. See Graphic for recommended placement.
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x15″ (SQ300x1500)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 15″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
SQUARE U-BOLTS (spring OVER axle): We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0414-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, standard spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1968-1978
- CHEVROLET CAMARO/FIREBIRD 1967-1981
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0414-250)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, standard spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- AMC JAVELIN, 1968-1977
DODGE ASPEN, 1976-1980
DODGE CHALLENGER, 1970-1974
DODGE CHARGER, 1966-1978
DODGE CORONET, 1965-1976
DODGE DART, 1963-1976
DODGE SWINGER, 1963-1976
DODGE DEMON, 1962-1976
DODGE POLARA, 1965-1973
FORD FALCON, 1970-1975 - FORD MAVERICK, 1964-1966
FORD MUSTANG, 1964-1973 (w/factory multi spring) - FORD MUSTANG, 1964-1966 (w/8″ housing, factory multi spring)
MERCURY COMET, 1960-1963
PLYMOUTH BARRACUDA, 1964-1973
PLYMOUTH BELVEDERE, 1965-1970
PLYMOUTH DUSTER, 1970-1976
PLYMOUTH FURY, 1962-1978
PLYMOUTH GRAND FURY, 1975-1977
PLYMOUTH GTX, 1967-1971
PLYMOUTH ROADRUNNER, 1968-1975
PLYMOUTH SATELLITE, 1965-1974
PLYMOUTH SAVOY, 1962-1964
PLYMOUTH SCAMP, 1960-1976
PLYMOUTH VALIANT, 1960-1976
PLYMOUTH VOLARE, 1976-1980
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
Accessories
U-Bolts, Round/set, 3.5″x9.5″ (DUR350x950)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 3.5″ axle ( 3.5″ inside diameter x 9.5″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews)
