parts
Showing 28–36 of 204 resultsSorted by popularity
-
AccessoriesTIE DOWN BRACKETS/PAIR (TD-190M)
TIE DOWN BRACKETS – SET OF TWO (90 degree angle)
DESIGNED TO FIT STANDARD CALTRACS, CALTRACS FOR 1500 SERIES TRUCKS and CALTRACS FOR S-10 TRUCKS
Heavier than our other Tie Down Brackets: 1/4″ ” Zinc-Plated Steel, 90 degree angle. Overall size: 5-1/8″ x 4″; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps.(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-325×562)
Calvert Racing Shackle and Bushing set for some GM cars that have Calvert Split Mono springs installed.
Fits: 1967-1981 Camaro/Firebird, 1968-1978 Nova/Ventura/Omega/Apollo with Calvert Split Mono springs installed.
Replace old worn out shackles with new shackles along with polyurethane bushings for the upper frame as well as the rear spring eye to reduce suspension binds and ensure a long service life. 3-1/4″ center to center. Includes required hardware. 9/16″ bolt.
(0 reviews) -
CalTracs Pivot Plates
Pivot Plates, Low Pro/set of 4 (PL-0421)
SET OF FOUR LOW PROFILE PLATES (two for each side)
LOW PROFILE STANDARD PLATES for CalTracs. Low profile is used primarily for street driving and allows an extra 1.5″ ground clearance compared with drag profile plates. 3.5″ long, measured from center of spring eye to bottom of plate.; allows an extra 1.5″ ground clearance than racing profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
Made with 5/16″ mild steel and black powder coated.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 29.5″ (L270-295-330)
SET OF TWO
1.25″ diameter x 29.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-1500)
Chevrolet Silverado 1500
GMC Sierra 1500
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Built for 3″ axle tube/2.5″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, low pro 1 Hole (PL-0521)
SET OF FOUR LOW PROFILE PLATES
Designed for STREET TRUCKS. mostly street driving. Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 3.5″ long, measured from center of spring eye to bottom of plate; approximately 1.5″ more ground clearance for street driving than drag race profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-23)
1967-1981 Chevrolet Camaro
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye, two alignment washers.
If you need replacement bushings for Calvert Springs, please call us directly.
(0 reviews) -
Accessories
U-Bolts, Square/set, 2.5″ x 9″ (SQ250x90)
SET OF FOUR SQUARE U-BOLTS w/hardware
2.5″ axle diameter x 9″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FEQ page or CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 22.5″ (L200-225-260)
SET OF TWO
1.25″ diameter x 22.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews)
