parts
Showing 55–63 of 204 resultsSorted by popularity
-
CalTracs Rear MountsCalTracs Rear Spring Mount (MT-6)
SOLD SEPARATELY
Rear Spring Mount for CalTracs assembly. Designed for Ford Mustangs, double tab.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-2501)
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 3.25″ diameter axle/2.5″ – 3″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
Accessories
HD SPRING CLAMPS/set of 2 (SCH-10)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1″ deep
Heavy duty steel, zinc coated spring clamps designed for Calvert Racing’s Split Mono Leafsprings. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
These clamps require a chamfered 3/8″ hole be drilled into the leaf for the rivet to be inserted and pressed to secure. NOTE: Back of spring , drill/chamfer the bottom spring. For the front of the spring, drill/chamfer the top spring.
Be sure to measure your springs to make sure the clamps will fit.
SCH-10 shown.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Monster Pivot Plates, 4 hole (PL-0524)
SET OF FOUR MONSTER PLATES
Designed for LIFTED OR MONSTER RACING TRUCKS. Four Adjustment Holes for maximum adjustability.
Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
Accessories
HD SPRING CLAMPS/set of 2 (SCH-15)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1.5″ deep
Heavy duty steel, zinc coated spring clamps designed for Calvert Racing’s Split Mono Leafsprings. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
These clamps require a chamfered 3/8″ hole be drilled into the leaf for the rivet to be inserted and pressed to secure. NOTE: Back of spring , drill/chamfer the bottom spring. For the front of the spring, drill/chamfer the top spring.
Be sure to measure your springs to make sure the clamps will fit.
SCH-10 shown.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 3 hole (PL-0523)
SET OF FOUR PLATES
Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-21)
1955-1957 Chevrolet Bel Air
Kit includes two aluminum bushings, 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-2502)
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 3.5″ diameter axle/2.5″ – 3″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-33)
1988-1998 Chevrolet/GM 1500, 2500, 3500 Series
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews)
