shackle
Showing 1–9 of 18 resultsSorted by popularity
-
AccessoriesSPRING SLIDERS for Calvert Springs (SL-300CR )
SET OF TWO SPRING SLIDERS
Designed to fit Calvert Leafsprings installed on ALL CARS & TRUCKS (except Chevy Bel Air). Outside diameter aluminum bushings: 1″.
May also fit most Chrysler factory springs due to rear bearing size.
Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.
(0 reviews) -
Accessories
SPRING SLIDERS for S10 Factory Multi Springs (SL-300S10)
SET OF TWO SPRING SLIDERS
Designed for S10 and S10/Blazer FACTORY Multi Leafsprings. Outside diameter aluminum bushings: 1-1/2″.
NOTE: If you have Calvert Springs, please use Part Number SL-300CR
Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.
SL-300CR shown.
(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-325×562)
Calvert Racing Shackle and Bushing set for some GM cars that have Calvert Split Mono springs installed.
Fits: 1967-1981 Camaro/Firebird, 1968-1978 Nova/Ventura/Omega/Apollo with Calvert Split Mono springs installed.
Replace old worn out shackles with new shackles along with polyurethane bushings for the upper frame as well as the rear spring eye to reduce suspension binds and ensure a long service life. 3-1/4″ center to center. Includes required hardware. 9/16″ bolt.
(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-300x562A)
Calvert Racing Shackle and Bushing set for A-Body Mopar products.
Set includes two shackles and a total of eight polyurethane bushings (4 for the rear eye of the spring and 4 for the upper frame shackle). The shackles retain a 1/2″ shouldered bolt that necks down to a 3/8″ thread, 3-1/2″ center to center. Required nuts included.
(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-300x562B)
Calvert Racing Shackle and Bushing set for B and E-Body Mopar Chrysler products.
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included. 3-1/2″ center to center.
(0 reviews) -
Accessories
SPRING SLIDERS for GM Factory Multi Springs (SL-300GM )
SET OF TWO SPRING SLIDERS
1967-1981 Chevrolet Camaro
1968-1978 Chevrolet Nova
Designed for certain GM FACTORY Multi Leafsprings. Outside diameter aluminum bushings: 1-5/8″.
NOTE: If you have Calvert Springs, please use Part Number SL-300CR
Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.
SL-300CR shown.
(0 reviews) -
Accessories
HANGER/SHACKLE KIT (H64K)
1962-1965 Ford Fairlane
Designed to work directly with CalTracs. These hangers replace the original front hangar plates. Includes Hangers and Rear Shackles and is required when equipping your vehicle with CalTracs and Calvert Springs.
Kit includes set of two Hangers and two Shackles. Also includes two grade 8 spring eye bolts/nuts, six bolts that mount the hangars to the chassis, six J-clips.
(0 reviews) -
Accessories
SPRING SLIDERS for 55-57 Chevy (SL-30055 )
SET OF TWO SPRING SLIDERS
1955-1957 Chevrolet Bel AirSliders replace spring shackles. Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement.
(0 reviews) -
Accessories
SHACKLE BUSHINGS/kit (M20973)
UPPER FRAME RAIL POLY BUSHING KIT
1-5/8″ outer diameter, 9/16″ inner diameter.
Fits GM: Nova, Camaro, etc. Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
(0 reviews)
