SHOCKS
Showing 19–27 of 50 resultsSorted by popularity
-
CF Series 90/10 Race ShocksCF Series Front Racing Shocks/pair (CF22112)
UNIVERSAL FRONT RACING SHOCK
Eyelet on BOTH ENDS. Compressed 11 3/8″, Extended 17″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.(0 reviews) -
CF Series 90/10 Race Shocks
CF Series Front Racing Shocks/pair (CF43093-1)
1955-1957 Chevrolet BelAir
1963-1967 Chevrolet Corvette
1973-1993 Dodge D100
1960-1972 Ford Galaxie
Collapsed Length: 9.18″, Extended Length: 14.37″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
(0 reviews) -
CR Series 9 Way Adjustable SHocks
HR Series Rear Shocks/pair (HR22142)
Collapsed Length: 14-1/4″, Extended Length: 22-1/8″, Approx. Ride Height: 16.25″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s HR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Australia
CR Series Rear Shocks/pair (CR42123)
LIMITED STOCK AVAILABLE
NOTE: CR42123 will be be REPLACED with HR42123 (available approx Feb 2026)
HR Series High Resistance Shocks have all the benefits of our CR Series Rear Shocks PLUS the upper end of the dial offers higher resistance of separation on hard acceleration, perfect for Drag Racing. Dialing to the lower numbers ease the separation for more comfortable street driving.
1982-2002 Chevrolet Camaro
AUSTRALIAN VEHICLES:
1968-1971 Holden HK/HT/HG Sedan, Panel Van, Ute, Monaro*
* Spring ride heights or shock location may affect part numbers. Contact our Australian Dealers for information.
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 12-14″, Extended Length: 18-5/8″, Approx. Ride Height: 14-1/4″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair (CR22150)
1965-1974 Plymouth Satellite
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 15″, Extended Length: 23-3/4″, Approx. Ride Height: 17″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair Universal (CR22150)
Designed for vehicles that fit shocks with 1/2″ eyelet on BOTH ends.
Universal 9-Way Adjustable Shock pair, Collapsed Length: 15″, Extended Length: 23-3/4″, Approx. Ride Height: 17″ * (Measure center eyelet to eyelet with car on the ground and weight on the tires.)
Please call if you have any questions.
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 15″, Extended Length: 22.25″, Approx. Ride Height: 17″
*Approximate lengths. Note: Racing shocks require different collapsed/extended lengths than stock/street shocks.
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.Generic eyelet/eyelet shock shown
(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR32150)
PAIR BLEMISHED SHOCKS: May contain scratches or dings on outer shell. Tested for performance.
Collapsed Length: 15″, Extended 23-3/4″, Approx. Ride Height 17-1/2″ *
*Approximate lengths. Note: Racing shocks require different collapsed/extended lengths than stock/street shocks.
1973-1978 Buick Apollo
1968-1978 Chevrolet Nova
1971-1976 Oldsmobile Omega
1971-1977 Pontiac Ventura
Please call if you have any questions.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.PHOTOS do not show actual blemished shock.
(0 reviews) -
CF Series 90/10 Race Shocks
CF Series Front Racing Shocks/pair (CF43103)
1962-1965 Ford Fairlane
Collapsed Length: 9.18″, Extended Length: 14.37″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.(0 reviews) -
CR Series 9 Way Adjustable SHocks
HR Series High Resistance Rear Shocks/pair (HR32128)
HR32128 has REPLACED CR32138
1982-2004 Chevrolet S10 (-2″ / -3″ drop)
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 12-3/4″, Extended Length: 19-1/8″, Approx. Ride Height: 14.75″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s HR Series 9-Way Adjustable High Resistance Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted PLUS the upper end of the dial offers higher resistance of separation on hard acceleration, perfect for Drag Racing. Dialing to the lower numbers ease the separation for more comfortable street driving.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews)
