BUICK: 1973-1978 Apollo, 1973-1987 Regal/Grand National, 1964-1979 Skylark GS
CHEVROLET: 1967-1981 Camaro, 1964-1983 Chevelle, 1964-1983 Malibu, 1968-1978 Nova, 1985-2002 S10
DODGE: 1994-2003 Dakota, 1994-2003 Dakota RT
FORD: 1966-1979 Fairlane, 1972-1979 Ranchero
OLDSMOBILE: 1964-1988 Cutlass, 1968-1971 442, 1973-1979 Omega
PONTIAC: 1967-1981 Firebird/TransAm, 1969-1987 Grand Prix, 1964-1974 GTO, 1964-1981 LeMans, 1971-1977 Ventura
AUSTRALIA: 1968-1971 Holden HH/HT/HG Sedan, Panel Van, Ute, Monaro (MODIFY: Widen lower control arm shock opening)
AUSTRALIA: 1971-1984 Holden HQ/WB Ute, One Tonner, Panel Van. (MODIFY: Widen lower control arm shock opening)
Collapsed Length: 9.18″, Extended Length: 14.37″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
NOTE: DRAG SHOCKS ONLY, NOT FOR HIGHWAY USE.
Sold as a pair. Includes required hardware. If your application’s ride height has been changed, please call Calvert Racing at 661-728-9600 before ordering.
$148.00
In Stock
1964-1973 Ford Mustang
Collapsed Length: 8.93″, Extended Length: 13.89″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
BLEMISHED SHOCKS. May contain scratches or dings on outer shell. Tested for performance.
1964-1973 Ford Mustang
Collapsed Length: 8.93″, Extended Length: 13.89″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
PHOTOS do not show actual blemished shocks.
1960-1969 Ford Falcon
1964-1973 Ford Mustang
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 11-5/8″, Extended Length: 17-7/8″, Approx. Ride Height: 15-1/2 – 16″
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.
1968-1974 AMC AMX, Javelin
1955-1957 Chevrolet BelAir (-1″ / -2″ drop)
1967-1969 Chevrolet Camaro
1962-1967 Chevrolet Nova Chevy II
1967-1979 Pontiac Firebird
1967-1979 Pontiac TransAm
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 13-1/4″, Extended Length: 20-5/8″, Approx. Ride Height: 15-14″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.