Parabolic Mono Leafsprings AUSTRALIA -1″ Drop (PS910-860)

1″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS W/ STANDARD EYE SPRING

1968-1984 Holden HQ-WB Utility, One Tonner, Panel Van

 

Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.

Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is  arch verified. Center pins and bushings included.

CalTracs Solid Bushings included when ordered directly from Calvert Racing.

NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

Please call if you are running on original or springs over 20 years old; your ride height may need to be adjusted to achieve expected results.

$520.00

In Stock

Parabolic Mono Leafsprings AUSTRALIA -1" Drop (PS910-860)
Parabolic Mono Leafsprings AUSTRALIA -1" Drop (PS910-860) - Image 2
Parabolic Mono Leafsprings AUSTRALIA -1" Drop (PS910-860) - Image 3

Additional information

Weight 60 lbs
Dimensions 65 × 5 × 8 in

GO TO CART

Categories: , ,
SKU: PS910-860

Recently Viewed:

No recently viewed products to display

Related products

  • Leafsprings

    Split Mono Leafsprings/pair Stock Height (422-36)

    1966-1973 Dodge Charger

    1966-1976 Dodge Coronet

    1966-1970 Plymouth Belvedere

    1965-1975 Plymouth Fury

    1967-1971 Plymouth GTX

    1968-1973 Plymouth Road Runner

    1966-1974 Plymouth Satellite

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $498.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair Stock Height (421-36)

    1974 Dodge Charger

    1965 Dodge Coronet

    1965 Plymouth Belvedere

    1974-1975 Plymouth Road Runner

    1965 Plymouth Satellite

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $498.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair -1″ Drop (420-34)

    1963-1976 Dodge Dart

    1962-1976 Dodge Demon

    1964-1969 Plymouth Barracuda

    1970-1976 Plymouth Duster

    1962-1964 Plymouth Savoy

    1960-1976 Plymouth Scamp

    1960-1966 Plymouth Valiant

    -1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $459.00 Add to cart
  • Leafsprings

    Split Mono Leafsprings/pair Stock Height (650-36)

    1962-1965 Ford Fairlane

    STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR

    Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.

    All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.

    NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.

    Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.

    (0 reviews)
    $459.00 Add to cart