CalTracs Replacement Parts
Showing 1–9 of 109 resultsSorted by popularity
-
AccessoriesU-Bolts, Round/set, 3″x7″ (UR300x70)
SET OF FOUR ROUND U-BOLTS w/hardware
3″ axle diameter x 7″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Replacement Parts
CalTracs Wrenches/pair (WR-01)
SET OF TWO WRENCHES
Calvert Racing specially designed 1-1/8″ wrenches make it easy to make adjustments on your CalTracs traction bar system. The wrenches have 1-1/8″ opening for adjusting links and jamnuts. The 6″ handle featured an offset/angled head helps in low clearance applications where space is limited.
Wrenches are constructed of heat treated 4340 Chromoly for durability and longevity, finished in a clear anodized zinc plating to resist corrosion. Rubberized grip for comfort and to reduce slippage.
(0 reviews) -
Sale!CalTracs Replacement Parts
CalTracs ROD END RH DISCONTINUED (BCMR-12)
DISCONTINUED PART – SOLD SEPARATELY – LIMITED QUANTITIES
RIGHT rod end/Heim joint for standard CalTracs Force Transfer Links.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
(0 reviews) -
Accessories
U-Bolts, Round/set 3″x9″ (UR300x90)
SET OF FOUR ROUND U-BOLTS w/hardware
3″ axle diameter x 9″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Replacement Parts
CalTracs ROD END LH (CML-12)
SOLD SEPARATELY
LEFT rod end/Heim joint for standard CalTracs Force Transfer Links.
3/4″ rod ends have a radial static load capacity of over 14,000 pounds.
RIGHT rod end available, part # CMR-12
(0 reviews) -
CalTracs Rear Mounts
CalTracs Rear Spring Mount (MT-8)
SOLD SEPARATELY
Rear Spring Mount for CalTracs assembly. Designed for Chevrolet trucks with flip kit installed.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
(0 reviews) -
Accessories
U-Bolts, Round/set, 3.25″x7″ (UR325x70)
SET OF FOUR ROUND U-BOLTS w/hardware
3.25″ axle diameter x 7″ long, axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.75″x7″ (UR275x70)
SET OF FOUR ROUND U-BOLTS w/hardware
2.75″ axle diameter x 7″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Pivot Plates
CalTracs Pivot Plates/set of 4 (PL-0422)
SET OF FOUR DRAG PROFILE PLATES, TWO HOLES
Designed for RACING VEHICLES on RACE TRACKS. Two holes for extra clearance. Made with 5/16″ Mild Steel, black powder coated for added durability. 5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews)
