CalTracs Replacement Parts
Showing 100–108 of 116 resultsSorted by popularity
-
Sale!
AccessoriesU-Bolts, Round/set, 3.5″x7″ clearance (CUR350x70)
CLEARANCE
SET OF FOUR ROUND U-BOLTS w/hardware
3.5″ axle diameter x 7″ long, axle ABOVE springs
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter, Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514-250)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET CAMARO, 1963-1964
- CHEVROLET S10, 1982-2004
- DODGE DAKOTA, 1996-2003
- FORD GALAXIE, 1960-1962
- FORD FAIRLANE, 1962-1970
- FORD FALCON, 1966-1970
- FORD PINTO, 1970-1970
- FORD RANGER, 1983-2012
- FORD TORINO, 1968-1976
- MERCURY COMET, 1966-1977
- MERCURY COUGAR, 1967-1973
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1962-1967
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
Sale!CalTracs Links
CalTracs Links & HD Coarse Heims/set- 29.5″ (CL-270-295-330)
CLEARANCE
SET OF TWO COARSE THREAD LINKS and FOUR COARSE THREAD HEIM JOINTS resist binding, especially in the dirt.
1.25″ diameter x 29.5″ force transfer links with coarse threads. (Measure end to end. Can be lengthened 3/4″ each end by turning once installed). Includes FOUR (2 RH and 2 LH) Coarse Thread Heim Joints. Upgraded Coarse Thread Link and Heim Joints fit most full size Chevrolet Trucks’ CalTracs: part #s 3304, 3300, 3404, 3400
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.75″x7.875″ (DUR275X7875)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 2.75″ axle ( 2.75″ inside diameter x 7.875″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.625″x6″ (DUR2625X60)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 2.625″ axle ( 2.625″ inside diameter x 6″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 33″ (L305-330-365)
SET OF TWO
1.25″ diameter x 33″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 32.5″ (L300-325-360)
SET OF TWO
1.25″ diameter x 32.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 28.25″ (L257-285-317)
SET OF TWO
1.25″ diameter x 28.25″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews)
