CalTracs Replacement Parts
Showing 28–36 of 109 resultsSorted by popularity
-
CalTracs Rear MountsCalTracs Rear Spring Mount, Right (MT-37R)
Chevrolet S10 with shock mounts.
SOLD SEPARATELY
RIGHT Rear Spring Mount for CalTracs assembly.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
LEFT mount available, part # MT-37L
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 2 hole (PL-0522)
SET OF FOUR RACING PROFILE PLATES
Designed for RACING TRUCKS. Two Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.75″x9″ (UR275x90)
SET OF FOUR ROUND U-BOLTS w/hardware
2.75″ axle diameter x 9″ long, for axle ABOVE springs
Round U-bolts, zinc plated Grade 5 material, 1/2″ diameter, kits include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR275x70 shown)
(0 reviews) -
CalTracs Rear Mounts
CalTracs Rear Spring Mount (MT-6)
SOLD SEPARATELY
Rear Spring Mount for CalTracs assembly. Designed for Ford Mustangs, double tab.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-2501)
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 3.25″ diameter axle/2.5″ – 3″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Monster Pivot Plates, 4 hole (PL-0524)
SET OF FOUR MONSTER PLATES
Designed for LIFTED OR MONSTER RACING TRUCKS. Four Adjustment Holes for maximum adjustability.
Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 3 hole (PL-0523)
SET OF FOUR PLATES
Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x6″ (UR250x60)
SET OF FOUR ROUND U-BOLTS w/hardware
2.5″ axle diameter x 6″ long
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR250x60 shown)
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 21.5″ (L190-215-250)
SET OF TWO
1.25″ diameter x 21.5″ force transfer links. Measure end to end. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews)
