belair
Showing 1–9 of 12 resultsSorted by popularity
-
CR Series 9 Way Adjustable SHocksCR Series Rear Shocks/pair (CR42133) SEE BELOW
CR42133 is being replaced with HR42133, high resistance rear shocks,
1968-1974 AMC AMX, Javelin
1955-1957 Chevrolet BelAir (-1″ / -2″ drop)
1967-1969 Chevrolet Camaro
1962-1967 Chevrolet Nova Chevy II
1967-1979 Pontiac Firebird
1967-1979 Pontiac TransAm
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 13-1/4″, Extended Length: 20-5/8″, Approx. Ride Height: 15-14″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -2″ Drop (PS210-09)
1955-1957 Chevrolet BelAir
-2″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings Stock Height (PS210-13)
1955-1957 Chevrolet BelAir
STOCK HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -3″ Drop (PS210-07)
1955-1957 Chevrolet BelAir
-3″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -1″ Drop (PS210-11)
1955-1957 Chevrolet BelAir
-1″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings +1″ Height (PS210-15)
1955-1957 Chevrolet BelAir
+1″ HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings -1″ DROP (PS230-8)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, – 1 INCH DROP height
FOR RACING VEHICLE UNDER 3,000 POUNDS WITH CENTER SPRING EYES
Narrower width allows for better side tire clearance, up to 1/4″
1967-1981 Chevrolet Camaro
1968-1978 Chevrolet Nova
PLEASE CALL TO VERIFY IF THESE WILL FIT YOUR VEHICLE. 661-728-9600, M-F, 8am-4:30pm Pacific time.
Also available, -1″ drop, part # PS230-6
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings. Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing. LIMITED QUANTITY AVAILABLE, ONLY THROUGH CALVERT RACING.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings STOCK HEIGHT (PS230-6)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, Stock height (also available, 1″ DROP, part # PS230-8)
Narrower width allows for better side tire clearance, up to 1/4″
FOR RACING VEHICLE UNDER 3,000 POUNDS WITH CENTER SPRING EYES
1967-1981 Chevrolet Camaro
1968-1978 Chevrolet Nova
PLEASE CALL TO VERIFY IF THESE WILL FIT YOUR VEHICLE. 661-728-9600, M-F, 8am-4:30pm Pacific time.
Also available, -1″ drop, part # PS230-6
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Parabolic Mono Leafsprings (PS420-6)
2″ WIDE MONO PARABOLIC LEAFSPRINGS, LIMITED QUANTITIES AVAILABLE
Narrower width allows for better side tire clearance, up to 1/4″
Mopar A-Body, Stock Height
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
