parts
Showing 127–135 of 180 resultsSorted by popularity
-
AccessoriesALUMINUM BUSHING/SET (BK-35)
2011-2016 Chevrolet/GM 1500/2500 Series
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x15″ (SQ300x1500)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 15″ long, axle BELOW springs.
Square U-bolts, Grade 5 material, zinc plated, 9/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.
SQUARE U-BOLTS (spring OVER axle): We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews) -
CalTracs Replacement Parts
CalTracs Force transfer Links/pair- 15.5″ (L130-155-190)
SET OF TWO
1.25″ diameter x 15.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Accessories
U-Bolts, Round/set, 3.5″x9.5″ (DUR350x950)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 3.5″ axle ( 3.5″ inside diameter x 9.5″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
Accessories
SPRING SLIDERS for C1500 Factory Multi Springs (SL-30015)
SET OF TWO SPRING SLIDERS
1988-2016 C1500 trucks with FACTORY Multi Leafsprings. Outside diameter aluminum bushings: 1.680″
FABRICATION REQUIRED TO MOUNT TO FRAME. Call 661-728-9600 if you have questions.
NOTE: If you have Calvert Springs, please use Part Number SL-300CR
Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.
SL-300CR shown.
(0 reviews) -
Accessories
SHACKLE BUSHINGS/kit MOPAR (M20694)
UPPER FRAME RAIL POLY BUSHING KIT (REPLACEMENT)
Fits most MOPAR vehicles. 1″ Outer Diameter, 1/2″ Inner Diameter
Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
M20697 SHOWN.
(0 reviews) -
Accessories
SPRING SHACKLES/set (SHU-300×500)
Calvert Racing Shackle and Bushing set for 62-65 Fairlane.
Universal Shackles for vehicle with Calvert Split Mono Leafsprings with 1/2″ bolt and 1″ OD (outer diameter) bushings top and bottom, 3-1/2″ center to center.
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included.
(0 reviews) -
CalTracs Pivot Plates
CalTracs Pivot Plates/set of 4 for ’55-’57 Chevrolet (PL-0124)
DESIGNED FOR 1955-1957 CHEVROLET
SET OF FOUR PLATES
Made with 5/16″ Mild Steel, black powder coated for added durability. 5.75″ long.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-285-310-345)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 31″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER
(0 reviews)
