Shop
Showing 271–279 of 740 resultsSorted by popularity
-
CalTracs - StandardCalTracs Standard (2100)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1955-1957 Chevrolet BelAir, stock springs, flipped inboard. Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce rattle.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CF Series 90/10 Race Shocks
CF Series Front Racing Shocks/pair (CF43093-1)
1955-1957 Chevrolet BelAir
1963-1967 Chevrolet Corvette
1973-1993 Dodge D100
1960-1972 Ford Galaxie
Collapsed Length: 9.18″, Extended Length: 14.37″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
(0 reviews) -
Accessories
6 Degree PINION SHIMS/PAIR-TRUCK (6-D562)
6 DEGREE SHIMS w/3/8″ pin with 9/16″ diameter head, most trucks – SET OF TWO
Pinion shims to help correct pinion angle under spring perches. For 2.5″ wide springs. Made of Billet aluminum.
INCLUDES 3/8″ CENTER PIN AND BOLTS TO FIT ONTO CALVERT RACING 2-1/2″ WIDE SPLIT MONO LEAFSPRINGS. Hole prevents possible slippage on more extreme angle. If you have a multi-springpack, you may need longer bolts.
Also available: 2 and 4 degree pinion shims
6-D500 SHOWN
(0 reviews) -
Lifestyle
Limited Edition 2025 Calendar (LS-CAL-2025)
2025 LEAVE ‘EM IN THE DUST
2025 Calvert Racing Limited Edition Calendar makes a GREAT GIFT for the racing or car enthusiast and you can’t beat the price!!
Custom designed by Calvert Racing and printed locally, these colorful, high quality glossy wall calendars feature photos from nineteen actual Calvert Racing customers. Every month features a photo of a new vehicle, plus a special double CENTERFOLD section featuring one lucky customer’s race vehicle! Date blocks offer plenty of room for notes, U.S. Holidays and dates of interest are indicated as well.
SIZE: 8.5″ x 11″ folded, 11″ x 17″ hanging, drilled hole for hanging.
USA SHIPPING: IF YOU ARE ONLY ORDERING CALENDARS (NO OTHER PRODUCTS IN YOUR CART), PLEASE CALL US DIRECTLY TO RECEIVE THE BEST MAILING RATE. 661-728-9600, Monday-Friday, 8am-4:30pm Pacific Standard Time.
SPECIAL PRICE! Very limited number available… when they’re gone, they’re gone!
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 23″ (L205-230-265)
SET OF TWO
1.25″ diameter x 23″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-55)
2003-2009 Dodge Ram 2500/3500
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
CalTracs Pivot Plates
CalTracs Monster Pivot Plates/set of 4 (PL-0424)
SET OF FOUR MONSTER PLATES, FOUR HOLES
Designed for RACING VEHICLES. Four holes for ultimate adjustability on lifted vehicles. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
CalTracs - Trucks
CalTracs Truck Low Pro (5101)
This kit includes LOW PROFILE Pivots Plates.
1987-1995 Dodge Dakota Sport
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed especially for trucks. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair -1″ Drop (650-35)
1962-1965 Ford Fairlane
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
