Shop
Showing 541–549 of 667 resultsSorted by popularity
-
CalTracs - StandardCalTracs Standard (4259)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Designed for applications with inboard springs.
1965-1973 Dodge Polara w/ 3″ stock inboard kit
1971-1973 Plymouth Fury w/ 3″ stock inboard kit
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x7″ (UR250x70)
SET OF FOUR ROUND U-BOLTS w/hardware
2.5″ axle diameter x 7″ long LIMITED SUPPLY
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR250x60 shown)
(0 reviews) -
Accessories
6 Degree PINION SHIMS/PAIR-TRUCK (6-D562)
6 DEGREE SHIMS w/3/8″ pin with 9/16″ diameter head, most trucks – SET OF TWO
Pinion shims to help correct pinion angle under spring perches. For 2.5″ wide springs. Made of Billet aluminum.
INCLUDES 3/8″ CENTER PIN AND BOLTS TO FIT ONTO CALVERT RACING 2-1/2″ WIDE SPLIT MONO LEAFSPRINGS. Hole prevents possible slippage on more extreme angle. If you have a multi-springpack, you may need longer bolts.
Also available: 2 and 4 degree pinion shims
6-D500 SHOWN
(0 reviews) -
Accessories
6 Degree PINION SHIMS/PAIR-CAR (6-D500)
6 DEGREE SHIMS w/3/8″ pin with 1/2″ diameter head most cars- SET OF TWO
Pinion shims to help correct pinion angle under spring perches. For 2.5″ wide springs. Made of Billet aluminum.
INCLUDES 3/8″ CENTER PIN AND BOLTS TO FIT ONTO CALVERT RACING 2-1/2″ WIDE SPLIT MONO LEAFSPRINGS. Hole prevents possible slippage on more extreme angle. If you have a multi-springpack, you may need longer bolts.
Also available: 2 and 4 degree pinion shims
6-D500 SHOWN
(0 reviews) -
Australian
CalTracs Low Profile Australian 2″ WIDE (6841-2)
For use with 2″ WIDE MONO SPRING, PART # PS680-7
THIS KIT INCLUDES 1-HOLE LOW PROFILE PIVOT PLATES.
Built for:
1966-1980 Ford Falcon w/Aftermarket housing, Axle 2.75″, 3.0″, 3.25″ x 2.5″ perch.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Australian
CalTracs Standard Australian 2″ WIDE (6840-2)
For use with 2″ WIDE MONO SPRING, PART # PS680-7
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1966-1980 Ford Falcon w/Aftermarket housing. Axle 2.75″, 3.0″, 3.25″ x 2.5″ perch
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Australian
CalTracs Low Profile Australian 2″ WIDE (6821-2)
For use with 2″ WIDE MONO SPRING, PART # PS680-7
THIS KIT INCLUDES 1-HOLE LOW PROFILE PIVOT PLATES.
Built for:
1966-1980 Ford Falcon w/original housing. Axle 2.81″x3″ perch.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Australian
CalTracs Standard Australian 2″ WIDE (6820-2)
For use with 2″ WIDE MONO SPRING, PART # PS680-7
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1966-1980 Ford Falcon w/original housing. Axle 2.81″ x 3″ perch.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Australia
Parabolic Mono Leafsprings AUSTRALIA -1″ (PS680-7)
2″ WIDE MONO PARABOLIC LEAFSPRINGS
1″ drop, most vehicles.
1986-1982 Ford Falcon
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
