Shop
Showing 676–684 of 748 resultsSorted by popularity
-
CalTracs Rear MountsCalTracs MX Rear Mount (MTX-6)
SOLD SEPARATELY
Fits Mustangs with a double shock tab. Mount fits both driver and Passenger side.
MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Designed for Ford Mustangs, double tab.
80 degree tabs, three adjustment holes, only 1/2″ longer than our standard CalTracs mounts for safety and track racing compliance.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount (MTX-4)
SOLD SEPARATELY
RIGHT (PASSENGER) Rear Spring Mount for CalTracs assembly. Designed for Chrysler vehicles.
MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance. Three adjustment holes, only 1/2″ longer than our standard CalTracs mounts for safety and track racing compliance.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
LEFT Rear MX Mount available, part # MT-3-MX
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, 90 degree tab (MTX-1 90)
SOLD SEPARATELY
1962-1967 Chevrolet Nova
1967-1969 Chevrolet Camaro
1967-1969 Pontiac Firebird
MX Rear Spring Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Designed for most Chevrolet cars.
80 degree tabs, three adjustment holes, only 1/2″ longer than our standard CalTracs mounts for safety and track racing compliance.
. To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
80 degree rear MX Mount also available.
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, 80 degree tab (MTX-1 80)
SOLD SEPARATELY
Fits 1968-1978 Chevrolet Nova. 80 degree shock tab.
MX Rear Spring Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance.
Designed for most Chevrolet cars.
80 degree tabs, three adjustment holes, only 1/2″ longer than our standard CalTracs mounts for safety and track racing compliance.
. To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
90 degree rear MX Mount also available.
(0 reviews) -
CalTracs-MX
CalTracs MX (6700-MX)
Built for:
1971-1980 Ford Pinto
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
EACH KIT ALSO INCLUDES a set of U-BOLTS for stock rear ends. If your vehicle has been modified, please call us so we can sent the correct size. 661-728-9600, M-F, 8am-4:30pm Pacific Time.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (4210-MX)
Built for:
1974 Dodge Charger
1965 Dodge Coronet
1964 Dodge Polara
1965 Plymouth Belvedere
1964 Plymouth Fury
1974-1975 Plymouth Road Runner
1965 Plymouth Satellite
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
EACH KIT ALSO INCLUDES a set of U-BOLTS for stock rear ends. If your vehicle has been modified, please call us so we can sent the correct size. 661-728-9600, M-F, 8am-4:30pm Pacific Time.
4210 MX Kit also includes a required Shock Bolt Kit.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs-MX
CalTracs MX (1030-MX)
1970-1977 AMX Hornet
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
EACH KIT ALSO INCLUDES a set of U-BOLTS for stock rear ends. If your vehicle has been modified, please call us so we can sent the correct size. 661-728-9600, M-F, 8am-4:30pm Pacific Time.
1030 MX Kit also includes required Shock Bolt kit.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Lifestyle
STADIUM SEAT, 14.5″ x 14.5″ X 1.5″, (LS-seat)
NEW! Calvert Racing cushioned STADIUM SEAT!
At approx. 14.5″ x 14.5″ x 1.5″, this fabric covered dense foam stadium cushion is just what you need on those hard stadium benches! Featuring a handy pocket and a carrying handle, this seat will help protect you from the extreme heat (or cold!) from metal bleachers or hard chairs. They also feature a zipper cover so you can remove the foam to clean the cover when necessary. Royal Blue with Calvert Racing logo.
At only $10 each, you can get enough for your whole crew, order today!
(0 reviews) -
Australia
Parabolic Mono Leafsprings AUSTRALIA -1″ Drop (PS910-860)
1″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS W/ STANDARD EYE SPRING
1968-1984 Holden HQ-WB Utility, One Tonner, Panel Van
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
