Shop
Showing 703–711 of 741 resultsSorted by popularity
-
CalTracs - StandardCalTracs Truck Low Pro (3741) DISCONTINUED
DISCONTINUED PART
Call for information.
(0 reviews) -
Sale!CR Series 9 Way Adjustable SHocks
CR Series BLEMISHED Rear Shocks/pair (BCR42133)
PAIR BLEMISHED SHOCKS. May contain scratches or dings on outer shell. Tested for performance.
1968-1974 AMC AMX, Javelin
1955-1957 Chevrolet BelAir (-1″ / -2″ drop)
1967-1969 Chevrolet Camaro
1962-1967 Chevrolet Nova Chevy II
1967-1979 Pontiac Firebird
1967-1979 Pontiac TransAm
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 13-1/4″, Extended Length: 20-5/8″, Approx. Ride Height: 15-14″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Lifestyle
2XL BLACK Zippered Hoodie Sweatshirt (ZH-2XB)
2X LARGE ZIPPERED HOODIE – BLACK
Medium weight hoodie with full length zipper and front pockets. 80% Cotton/20% Polyester for fit and comfort. Silk screened front and back. Machine washable, cold with like colors.
Available in limited quantities in L, XL, 2XL, 3XL, 4XL only. PLEASE NOTE: These hoodies run a bit narrow and long.
(ZH-XB shown)
(0 reviews) -
Lifestyle
4XL BLACK Zippered Hoodie Sweatshirt (ZH-4XB)
4X LARGE ZIPPERED HOODIE – BLACK
Medium weight hoodie with full length zipper and front pockets. 80% Cotton/20% Polyester for fit and comfort. Silk screened front and back. Machine washable, cold with like colors.
Available in limited quantities in L, XL, 2XL, 3XL, 4XL only. PLEASE NOTE: These hoodies run a bit narrow and long.
(ZH-XB shown)
(0 reviews) -
Wheelie Bar
Wheelie Bar (WB) Starting at $675
Specially BUILT TO ORDER to fit your application. Call Calvert Racing 66-728-9600 Monday-Friday, 8am-4:30pm Pacific time to order.
Designed by 2010 US Nationals A-Stick Winner John Calvert, this patented design controls wheelie height and subsequent drop on launch. Built with lightweight, strong Chromoly, the design’s triangulation adds strength without adding weight. Single wheel design does not interfere with steering as some double bars can do if one wheel hits before the other.
MIG Welded, Black Powder Coated. KIT INCLUDES: BARS, BRACKETS, BILLET ALUMUNUM WHEELS, SPACER/TRAVEL PLATE.
Optional angled wedges sold separately, reversible 12 or 18 degree wedge allows for increased or decreased pressure on wheel to adjust height of allowed wheelie. Made in USA.
PLEASE NOTE: This Wheelie Bar was designed for Leafspring Vehicles. Vehicles with other rear suspensions may not have the space required to make these patented Wheelie Bars fit.
(Photos shown with optional Billet Aluminum Wheels)
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair +1″ Height (372-35)
2004-2014 Chevrolet Colorado
2004-2014 GMC Canyon
PRICE PER PAIR, SPLIT MONO LEAFSPRINGS, +1″ RIDE HEIGHT
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Lifestyle
Big Gift Set 2023 (LS-BigGift23)
2023 BIG GIFT SET INCLUDES ONE EACH OF THE FOLLOWING:
- 2023 Limited Edition Calendar, featuring fantastic photos of 20 of our customer’s vehicles.
- Calvert Racing Shop Banner: Heavy vinyl banner, heat hemmed, heavy duty grommets on each corner for easy hanging in your shop, garage, toy hauler, or at the track! 3 foot wide x 1 foot tall.
- Coozie Can Cooler: Keep your cans or water bottle cool and look cool at the same time! 3/8″ foam neoprene, blue with white Calvert Racing logo. Flat size: 4×5.25″. Fits regular size drink cans and up to 17 oz water/drink bottles.
- Pocket Mini Screwdriver set: All metal pen style set for stronger hold on tip that other similar style sets. Set includes four small Phillips style (sizes range from PH00-2) and four flathead style (sizes range from V1.5-3.5) tips that all fit inside the pen-style base. Pocket clip keeps it secure in your pocket. Keep one in your junk drawer so you’ll always have a set at hand. Blue with white Calvert Racing logo.
- Leveling Pen: Handy pen with level, ruler, reversible screwdriver head (flat and Phillips), stylus. Blue with white Calvert Racing logo.
- 4-Color Pen: Black, Blue, Green and Red ink… all in one pen!
- Magnetic Screwdriver: Standard screwdriver with surprisingly powerful magnet for picking up those dropped nuts and bolts in awkward places. Pocket clip. Blue with white Calvert Racing Logo. 6″ long.
- Carabiner Keyring: Carabiner style keyring with metal Calvert logo plate clips to your belt loop so you don’t lose your keys. Blue woven strap, plate and carabiner-style hook. 5.75″ long
- Reusable Shopping bag: Roomy, yet folds up small to fit just about anywhere! Blue with white Calvert Racing logo.
A greater than $50 VALUE!
(0 reviews) -
Sale!Accessories
U-Bolts, Square/set, 2.25″x15.5″ (CSQ225x1550)
CLEARANCE: SET OF FOUR SQUARE U-BOLTS w/hardware
2.25″ axle diameter (2.25″ inside diameter x 15.5″ long, 4″ thread length.)
Square U-bolts, raw Grade 5 material, 5/16″ diameter. Set includes 4 U-bolts, nuts and washers. Not shown, 2 top plates.
All Sales Final on all clearance items. Please verify thread length will work with your application.
(0 reviews) -
Sale!Accessories
U-Bolts, Square/set, 3″x13.25″ (CSQ300x1325)
CLEARANCE: SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter (3-1/16″ inside diameter x 13-1/4″ long, 4-3/4″ thread length.)
Square U-bolts, raw Grade 5 material, 5/16″ diameter. Set includes 4 U-bolts, nuts and washers. Not shown, 2 top plates.
All Sales Final on all clearance items. Please verify thread length will work with your application.
(0 reviews)
