parts
Showing 64–72 of 182 resultsSorted by popularity
-
AccessoriesSHACKLE BUSHINGS/kit (M20973)
UPPER FRAME RAIL POLY BUSHING KIT
1-5/8″ outer diameter, 9/16″ inner diameter.
Fits GM: Nova, Camaro, etc. Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 21.5″ (L190-215-250)
SET OF TWO
1.25″ diameter x 21.5″ force transfer links. Measure end to end. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-42)
1962-1976 MOPAR vehicles
Includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushings for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
3.5″ Axle Perch/pair (HDP-350)
SPRING PERCHES FOR 3.5″ AXLE TUBE
Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle.
Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.
Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″
WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.
(0 reviews) -
CalTracs Rear Mounts
CalTracs Rear Spring Mount (MT-3)
SOLD SEPARATELY
LEFT Rear Spring Mount for CalTracs assembly. Designed for Chrysler vehicles.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
RIGHT Rear Spring Mount available, part # MT-4
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-21)
1955-1957 Chevrolet Bel Air
Kit includes two aluminum bushings, 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(0 reviews) -
CalTracs Pivot Plates
U-Bolts, Round/set, 2.25″x6″ (UR225x60)
SET OF FOUR ROUND U-BOLTS w/hardware
2.25″ axle diameter x 6″ long, for axle ABOVE springs
Round U-bolts, Grade 5 material, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
2.25″ Axle diameter x 6″ long(UR225X60 shown)
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 23.5″ (L210-235-270)
SET OF TWO
1.25″ diameter x 23.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
Accessories
MULTI SPRING CLAMPS/set of 6 (SCQ-01)
SPRING REBOUND STABILIZING CLAMPS FOR 2.5″ MULTI-SPRING/SET OF SIX
Rebound Stabilizing/Alignment fold over, quick on clamps 2.5″ wide multi-leafspring. See Graphic for recommended placement.
(0 reviews)
