Shop
Showing 478–486 of 758 resultsSorted by popularity
-
CalTracs BIG LINKSCalTracs BIG LINK KIT (BLK-290-315-350)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 31.5″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-285-310-345)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 31″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER
(0 reviews) -
CalTracs BIG LINKS
CalTracs BIG LINK KIT (BLK-280-305-340)
Upgrade kit especially for Lifted or Offroad Trucks
Stronger, more robust bars and coarse thread rod ends eliminate binding, especially in the dirt.
SET OF TWO BIG LINKS and FOUR COARSE THREAD HEIM JOINTS
Replaces standard links and Heim joints on HD Trucks only.
1.5″ diameter x 30.5″ force transfer Big Links.
Made with 4130 Chromoly, the CalTracs preload Big Links are 1/4″ larger diameter than the standard force transfer link and are threaded specifically for added strength, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
Includes four (4) required coarse thread Heim joints.
NOTE: Standard Heim joints will NOT fit coarse threaded ends.
PLEASE INCLUDE YEAR, MAKE AND MODEL IN THE NOTES SECTION OF YOUR ORDER
(0 reviews) -
Accessories
STRUT ROD KIT/pair (SR-40)
Built for Mopar A-Body.
Sold as a pair.(SR-40 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-61)
1960-1963 Ford Falcon
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
U-Bolts, Square/set, 3″x18″ (SQ300x1800)
SET OF FOUR SQUARE U-BOLTS w/hardware
3″ axle diameter x 18″ long, heavy duty 5/8″ diameter u-bolts. Axle BELOW springs.
We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see CalTracs Installation Guide for more info.
(SQ300x900 shown)
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair -1″ Drop (613-34)
1966-1970 Ford Falcon
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair -1″ Drop (425-44)
1965-1973 Dodge Polara
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair -1″ Drop (380-34)
1995-2004 Chevrolet S-10 Blazer ONLY
PRICE PER PAIR, SPLIT MONO LEAFSPRINGS, -1″ DROP RIDE HEIGHT
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
