Shop
Showing 505–513 of 758 resultsSorted by popularity
-
AccessoriesALUMINUM BUSHING/SET (BK-72)
2004-2008 Ford F150 & Lightning
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
CalTracs - Standard
CalTracs MX (4229-MX)
Designed for applications with inboard springs.
1970-1974 Dodge Challenger w/ 3″ stock inboard kit
1966-1973 Dodge Charger w/ 3″ stock inboard kit
1975-1978 Dodge Charger w/ 3″ stock inboard kit
1966-1976 Dodge Coronet w/ 3″ stock inboard kit
1970-1973 Plymouth Barracuda w/ 3″ stock inboard kit
1966-1970 Plymouth Belvedere w/ 3″ stock inboard kit
1965-1970 Plymouth Fury w/ 3″ stock inboard kit
1975-1978 Plymouth Fury w/ 3″ stock inboard kit
1967-1971 Plymouth GTX w/ 3″ stock inboard kit
1968-1973 Plymouth Road Runner w/ 3″ stock inboard kit
1966-1974 Plymouth Satellite w/ 3″ stock inboard kit
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x7″ (UR250x70)
SET OF FOUR ROUND U-BOLTS w/hardware
2.5″ axle diameter x 7″ long LIMITED SUPPLY
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR250x60 shown)
(0 reviews) -
CalTracs Pivot Plates
CalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0514-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, center spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1962-1967
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
Sale!CalTracs Links
CalTracs Links & HD Coarse Heims/set- 29.5″ (CL-270-295-330)
CLEARANCE
SET OF TWO COARSE THREAD LINKS and FOUR COARSE THREAD HEIM JOINTS resist binding, especially in the dirt.
1.25″ diameter x 29.5″ force transfer links with coarse threads. (Measure end to end. Can be lengthened 3/4″ each end by turning once installed). Includes FOUR (2 RH and 2 LH) Coarse Thread Heim Joints. Upgraded Coarse Thread Link and Heim Joints fit most full size Chevrolet Trucks’ CalTracs: part #s 3304, 3300, 3404, 3400
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs-MX
CalTracs MX (6410-MX)
Built for:
1964-1966 Ford Mustang with Factory Standard Eye Springs, original 8″ housing. If your Mustang has aftermarket springs, please CALL Calvert Racing at 661-728-9600 for the correct part number for your vehicle.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount, Left (MTX-37L)
SOLD SEPARATELY
Fits Chevrolet S10 with shock mounts (driver side only)
LEFT MX Rear Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Chevrolet S10 with shock mounts.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
RIGHT MX Mount available, part # MTX-37R
(0 reviews) -
CalTracs Rear Mounts
CalTracs MX Rear Mount (MTX-2)
Fits 1970-1981 Chevrolet Camaro with staggered shocks, both driver and passenger side.
MX Rear Spring Mount and hardware to upgrade your current CalTracs to CalTracs MX without sacrificing ground clearance
Three adjustment holes, only 1/2″ longer than our standard CalTracs mounts for safety and track racing compliance.
***To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. UPGRADED HARDWARE included. Black gloss powder coated for extra durability.
MOUNT FITS BOTH LEFT AND RIGHT SIDE.
(0 reviews) -
CalTracs-MX
CalTracs MX (6900-MX)
Built for:
1968-1976 Ford Torino / Grand Torino
***
To get the most out of your CalTracs, we recommend that your installed CalTracs bars are close to parallel to the ground when fully loaded. Sometimes that configuration is difficult to achieve depending on the mods or equipment you have installed on your drag race car. CalTracs MX helps solve that!
***
Full CalTracs MX kits for cars feature our brand new MX 3-Hole Adjustable Rear Mounts, MX 4-Hole Adjustment Pivot Plates, and upgraded 9/16” bolt pivot hardware, these kits offer up to TWELVE adjustment settings (compared to two hole adjustable settings in Standard Drag Profile kits) to allow for fine tuning your CalTracs for the best HOOK possible on your racecar. Our new MX rear mount and MX pivot plate designs keep the overall CalTracs assembly set-up above the tire rim line on 15” wheels for track competition compliance and safety, just 1/2” longer than our Standard Drag Profile CalTracs.
****
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Rod Ends/Heim Joints NOW COME WITH GREASE ZERK. Add a small amount of grease to minimize rattle.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
***Separate MX Mounts and Pivot Plates are available to upgrade your current CalTracs, call for details.
***
NOTE: MX Kits are not available for trucks. Your final product may vary from photo depending on your application. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews)
