parts
Showing 55–63 of 180 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs HD Monster Pivot Plates, 4 hole (PL-0524)
SET OF FOUR MONSTER PLATES
Designed for LIFTED OR MONSTER RACING TRUCKS. Four Adjustment Holes for maximum adjustability.
Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 8″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-2501)
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 3.25″ diameter axle/2.5″ – 3″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
CalTracs Pivot Plates
CalTracs HD Pivot Plates, 3 hole (PL-0523)
SET OF FOUR PLATES
Designed for LIFTED RACING TRUCKS. Three Hole, Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 6.5″ long, measured from center of spring eye to bottom of plate.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
NOTE: It is recommended that you use the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-33)
1988-1998 Chevrolet/GM 1500, 2500, 3500 Series
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Accessories
HD SPRING CLAMPS/set of 2 (SCH-10)
HEAVY DUTY CLAMPS FOR 2.5″ SPRING, 1″ deep
Heavy duty steel, zinc coated spring clamps. Includes two clamps, 2 bolts, 2 limiting tubes, and rivets. Rivets are designed to be pressed into spring hole to secure.
SCH-10 shown.
(0 reviews) -
CalTracs Rear Mounts
CalTracs HD Rear Spring Mount (MT-2502)
SOLD SEPARATELY
Rear Spring Mount for HD Truck CalTracs assembly. Designed for HD Trucks with 3.5″ diameter axle/2.5″ – 3″ wide spring.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
MOUNT FITS LEFT OR RIGHT SIDE.
(0 reviews) -
Accessories
SPRING SLIDERS for 55-57 Chevy (SL-30055 )
SET OF TWO SPRING SLIDERS
1955-1957 Chevrolet Bel AirSliders replace spring shackles. Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement.
(0 reviews) -
Accessories
U-Bolts, Round/set, 2.5″x6″ (UR250x60)
SET OF FOUR ROUND U-BOLTS w/hardware
2.5″ axle diameter x 6″ long
Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
NOTE: While you can use your vehicle’s stock ubolts with CalTracs, Calvert Racing’s 1/2″ diameter u-bolts is an upgrade as most stock applications come with 7/16″ diameter u-bolts. We recommend torqueing the u-bolts to 65-70 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see the FAQ page on this website or CalTracs Installation Guide for more info.
(UR250x60 shown)
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-22)
1963-1967 Chevrolet Nova
1963-1967 Chevy II
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews)
