Shop
Showing 532–540 of 610 resultsSorted by popularity
-
CalTracs - StandardCalTracs Standard (4259)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Designed for applications with inboard springs.
1965-1973 Dodge Polara w/ 3″ stock inboard kit
1971-1973 Plymouth Fury w/ 3″ stock inboard kit
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs - Trucks
CalTracs Truck (7704-1)
This kit includes LOW PROFILE Pivots Plates.
1983-2012 Ford Ranger (flipped)
Designed especially for trucks. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-77)
1983-2012 Ford Ranger
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye, 1 grease packet.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-37 shown)
(0 reviews) -
Australia
Parabolic Mono Leafsprings AUSTRALIA -1″ Drop (PS910-860)
1″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS W/ STANDARD EYE SPRING
1968-1984 Holden HQ-WB Utility, One Tonner, Panel Van
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Australia
Parabolic Mono Leafsprings AUSTRALIA -2″ Drop (PS910-860R)
2″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS W/ REVERSE EYE SPRING
1968-1984 Holden HQ-WB Utility, One Tonner, Panel Van
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Australia
Parabolic Mono Leafsprings AUSTRALIA Stock Height (PS840-4)
STOCK HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
1968-1971 Holden HKL/HT/HG Sedan, Panel Van, Utility, Monaro
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
CalTracs Solid Bushings included when ordered directly from Calvert Racing.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Australia
Split Mono Leafsprings/pair AUSTRALIAN Stock Height (A420-35)
STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR, 2-1/2″ wide
1962-1981 Valiant
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Australia
Split Mono Leafsprings/pair AUSTRALIAN -1″ Drop (A420-34)
1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR, 2-1/2″ wide
1962-1981 Valiant
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Australia
Split Mono Leafsprings/pair AUSTRALIAN Stock Height (A680-35)
STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR, 2-1/2″ wide
1966-1980 Ford Falcon
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
