Shop
Showing 64–72 of 667 resultsSorted by popularity
-
Sale!
Accessories2 Degree PINION SHIMS/PAIR BLEMISHED (2-DB)
2 DEGREE SHIMS – SET OF TWO
BLEMISHED. These shims contain scratches and dings which do not affect the performance of the part. ONLY AVAILABLE THROUGH CALVERT RACING. Limited number available, subject to prior sale.
Pinion shims to help correct pinion angle under spring perches. Made of Billet aluminum. Includes washers.
(0 reviews) -
Lifestyle
XXL Black T-Shirt (T-2XB)
2X-LARGE BLACK T-SHIRT
50/50 Cotton/Poly blend for comfort and ease of wear. Silk screened front and back. Machine washable.
(T-LB shown)
(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair (CR32150)
1973-1978 Buick Apollo
1982-2004 Chevrolet S10 (stock height)
1968-1978 Chevrolet Nova
1971-1976 Oldsmobile Omega
1971-1977 Pontiac Ventura
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 15″, Extended 23-3/4″, Approx. Ride Height 17-1/2″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Lifestyle
Carabiner Style Keyring (LS-Key)
Your whole crew needs these! Carabiner style keyring with metal Calvert logo plate. Blue strap, plate and carabiner-style hook. 5.75″ long
(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair (CR34136)
1970-1981 Chevrolet Camaro
1970-1981 Pontiac Firebird
1970-1981 Pontiac TransAm
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 14″, Extended Length: 23-1/4″, Approx. Ride Height: 16-1/2″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
Lifestyle
Calvert Racing Banner (BAN-S)
3 FT LONG x 1 FT TALL CALVERT RACING BANNER
Brand new redesigned banner! Perfect for hanging in your garage or shop! 3′ x 1′ Vinyl banner with grommets on all four corners. Heat-sealed hem.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair +1″ Height (230-45)
1973-1978 Buick Apollo
1967-1981 Chevrolet Camaro*
1968-1978 Chevrolet Nova*
1973-1979 Oldsmobile Omega*
1967-1981 Pontiac Firebird*
1974 Pontiac GTO*
1967-1981 Pontiac TransAm*
1971-1981 Pontiac Ventura*
PRICE PER PAIR, SPLIT MONO LEAFSPRINGS
*If you have the original perches installed, you will need our Space Adapter Plates: SP-1 (for multi springs) or SP-3 (for mono springs). Please see Parts & Accessories page to order.
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
CalTracs Replacement Parts
CalTracs HD Pivot Plates, low pro 1 Hole (PL-0521)
SET OF FOUR LOW PROFILE PLATES
Designed for STREET TRUCKS. mostly street driving. Berlin style plates for center spring eye. Made with 5/16″ Mild Steel, black powder coated for added durability. 3.5″ long, measured from center of spring eye to bottom of plate; approximately 1.5″ more ground clearance for street driving than drag race profile plates.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT PARTS ARE SENT.
(0 reviews) -
CalTracs - Standard
CalTracs Standard Low Pro (2401)
THIS KIT INCLUDES LOW PROFILE (1 Hole) PIVOT PLATES.
Low Profile allows approx. 1.5″ more ground clearance for vehicles used for every day street driving.
1970-1981 Chevrolet Camaro*
1970-1981 Pontiac Firebird
1970-1981 Pontiac Trans Am
Fits Ford 9″ with GM, Ford, or Universal perch.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce rattle.
*If your Camaro’s rear shocks have been moved from stock location, please call us at 661-728-9600, Mon-Fri, 8:00am-4:30pm, PST
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews)
