Shop
Showing 109–117 of 615 resultsSorted by popularity
-
LifestyleXXL Navy T-Shirt (T-2XN)
2X-LARGE NAVY T-SHIRT
50/50 Cotton/Poly blend for comfort and ease of wear. Silk screened front and back. Machine washable.
(T-LN shown)
(0 reviews) -
Accessories
SPRING SHACKLES/set (SH-300x562B)
Calvert Racing Shackle and Bushing set for B and E-Body Mopar Chrysler products.
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included. 3-1/2″ center to center.
(0 reviews) -
Accessories
2.75 ” Axle Perch/pair (HDP-275)
SPRING PERCHES FOR 2.75″ AXLE TUBE
Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.
Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.
Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″
WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.
(0 reviews) -
CalTracs Rear Mounts
CalTracs Rear Spring Mount, Right (MT-37R)
Chevrolet S10 with shock mounts.
SOLD SEPARATELY
RIGHT Rear Spring Mount for CalTracs assembly.
Made with 5/16″ mild steel to withstand the correct torque on your u-bolts and keep your rear-end from moving. Black gloss powder coated for extra durability.
LEFT mount available, part # MT-37L
(0 reviews) -
Lifestyle
Limited Edition 2022 Calendar (LS-CAL22)
Makes a GREAT GIFT for the racing or car enthusiast.
Custom designed by Calvert Racing and printed locally, these colorful, high quality glossy wall calendars feature photos from twenty-four actual Calvert Racing customers. Every month features a photo of a new vehicle, plus a special double CENTERFOLD CLASSICS page! Date blocks offer plenty of room for notes, U.S. Holidays are indicated as well.
SIZE: 8.5″ x 11″ folded, 11″ x 17″ hanging, drilled hole for hanging.
USA SHIPPING: IF YOU ARE ONLY ORDERING CALENDARS (NO OTHER PRODUCTS IN YOUR CART), PLEASE CALL US DIRECTLY TO RECEIVE THE BEST MAILING RATE. 661-728-9600, Monday-Friday, 8am-4:30pm Pacific Standard Time.
SPECIAL PRICE: The price is less than actual printing costs. Very limited number available, when they’re gone, they’re gone!
(0 reviews) -
Accessories
HANGER HARDWARE (HW23)
1967-1981 Chevrolet Camaro
1968-1979 Chevrolet Nova
1967-1981 Pontiac Firebird/TransAm
This kit includes new hardware for mounting front hangars in many GM leafspring equipped cars.
Includes two Grade 5 spring eye bolts/nuts, six bolts that mount the hangars to the chassis, along with six J-clips.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-32)
1973-1987 Chevrolet C-10
Kit includes two aluminum bushings and 2 steel inserts, one grease packet for FACTORY leafspring front spring eye.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Australia
CR Series Rear Shocks/pair 13″-13.5″ Universal (CR22116)
Designed for vehicles that fit shocks with 1/2″ eyelet on BOTH ends.
Universal 9-Way Adjustable Shock pair.
AUSTRALIAN VEHICLES: 1971-1984 Holden HQ/WB Ute, One Tonner, Panel Van*
* Spring ride heights or shock location may affect part numbers. Contact our Australian Dealers for information.
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 11.58″, Extended Length: 17.5″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks. Measure center eyelet to eyelet with car on the ground and weight on the tires.
Please call if you have any questions.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.Generic eyelet/eyelet shock shown
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair -1″ Drop (321-34)
1973-1987 Chevrolet C-10 Truck (56″)*
*Spring measured center eye to center eye along spring arch.
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading. Parabolic rear half design distributes the main spring pressure point through the length of the half, reducing spring breakage.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews)
